downside to recirculating drip

hey all,

I was just wondering what the negatives of recirculating drip fed feeding are..?

To me the system seem easy to set up , simple and easily maintainable & easy to add on to

I can understand they may not be as efficient as other systems.

before i make a decision everyone's opinions are very valuable to me


Thankyou for your time
 

BioShock.

Member
sounds like a Wilma etc... you will not acheive massive effects with these systems without adding RDWC/aero to them to get big yields

they are good to be left alone for a few days.. i cant do that with my AF60 i would be in big trouble!

if it is a wilme etc then be careful about the delivery manifolds as they are different depending on how many pots you have and the old 4 pot one was a really poor design! the 8/16 etc were ok though :)
 

TheTimeKeeper

Well-Known Member
So from what I can see your growing in your roofspace... I'm not sure exactly what you mean by recirculating drip however I'm a coco grower and to me, this simply means re-using any runoff from your drip feeds... the downside to this can be pithium/root rot, flucuating PH, and potentially an 'incomplete' feed depending on what the plant wants to take out. For this reason, a decade ago I moved to drain to waste... minimal runoff means not much $$ lost... IMO drain to waste with coco is teh way to go... also this is very safe in a roofspace! Stuff having a few hundred litres in your roof area! When somehting goes wrong that's alot of water coming down - I once knew a guy who had about 12 E&F tables and something went wrong, a couple of hundred litres went down through 3 levels of other peoples apartments!
 

zem

Well-Known Member
depends on your medium, for growrocks, I would use flood and drain instead, it will require less work to setup, the rocks will be watered evenly, and the drain sucks in fresh O2 for the roots. also there will be no algae problems because I flood below the level of the rocks not allowing the surface to get any ferts
 

JJFOURTWENTY

Well-Known Member
Drippers tend to clog, plus constructing all of the spaghetti lines is a real PITA.

It will yield good results, just the maintenance/complexity was enough for me to ditch it...
 
Top