Double check my first Setup!?

Hello everyone, hopefuly someone will be able to help, I'd highly appreciate it!

I have been growing outdoors for a while, but I'd like to step it up to indoor growing in a tent.
I am inexperienced with indoor growing, but I have read a lot and finally put together a setup that I think will work well. Im mainly going to be growing Autoflowers, about 4 plants at a time.

However, I was wondering if this setup works and if the components work together, if the fan sizes are good, if there won't be too much heat, or not enough air flow etc. Before I'm ordering it

Any tips or additions would be great too.

Setup:

Lights & ballast kit 600w: https://www.amazon.com/gp/product/B00CQ9JYGY/ref=pd_sim_86_7?ie=UTF8&refRID=R4S3WETD7EWNEF3HS0X4&th=1

Grow Tent 80x80x160: http://www.hydroponics.eu/growbox-c-22/mammoth-grow-box-s-383/grow-box-mammoth-lite-80-24302.html

Seeds: https://www.alchimiaweb.com/en/bloody-skunk-auto-product-4724.php

Carbon Filter (150mm): https://www.alchimiaweb.com/en/alchimia-can-lite-100150-carbon-filter-product-5300.php

Fan 150mm (200m3h): https://www.alchimiaweb.com/en/alchimia-in-line-extractor-product-4837.php

Soil (one of these should do for first grow I guess): https://www.alchimiaweb.com/en/soil-82_83_119_126/

15cm aluminium Duct: http://www.hydroponics.eu/fans-and-filters-c-29/ducting-s-78/flexible-ducting-aluminium-15cm-25860.html

Would these work well together without any problems? are the fans the right sizes for the heat..

you might run into problems with the height of the tent. I'd look for something with a height of 180cm if your space is large enough.

Chef420 said:

you might run into problems with the height of the tent. I'd look for something with a height of 180cm if your space is large enough.

Click to expand...

That'll leave me with a 100x100x180 which is the same price.. Sounds fine to me. Im gonna have to change the extraction fan size to 200mm but thats no problem, I do have enough space anyways. Thanks, Would you know anything about air inlet? Do i just get a simple fan turned the other way around?