DIY with Quantum Boards

SCJedi

Well-Known Member
My latest lanky sativa i grew under a 135w kit. Day 40 flower. Unkown bag seed clone ive had for a while. It always gets big like this and its a pain in the ass but its very easy to trim and very efficient grower, not picky on nutes at all.
I bet if you stripped the larfy bottoms off of that lady you'd see more energy dedicated to the tops! Pretty plant. I'd love to see a closeup of the colas
 

CoB_nUt

Well-Known Member
@Stephenj37826, (or anyone that knows) I recieved my replacement pads for my 96's. Thank you. Can I get some advice or a suggestion on how to remove the old pad & 96 from the heatsink? It is stuck pretty solid.
 
Last edited:

Terps420

Well-Known Member
The 3500k are tough to get your hands on. Usually sold out. In 3000k or 4000k.
4 Qb132's to my door with shipping 147$ the 132s can go up to 75 watts without a heatsink. I wouldnt advise 75 each anyway.
I run mine on a 240w1750mA so a lil over 50w a board. The driver was around 60$ shipped w/ tariffs included. 5 or 10. I forget.
I liked em so much I got 2 sets of 4!!
i had 8 qb132's and 2 lrs-350-36 drivers up until 2 days ago... Long story.. But i suggest running them at full blast of 75 watts each especially in flower. At beginning of yr i bought 4 qb132's ( 4@ 2700k v1's & 4@ 3000k V2's) v1's was 99 & V2's was 109 bucks. Plus 2 my 2 lrs-350-36 drivers was 80 total. My one driver had cosmetic damage on case cause usps dented it shipn it to me. It workd fine but i emailed the company to tell them my driver had dent on case. They apologized and asked if i want a new one and ship mine back or they suggested i keep both drivers and theyd refund my total for drivers.. I kept the dented driver and took my 80 bucks back. That place treated me like gold. Trc electronics here in usa is where il shop in future. So i paid 225 bucks for 600watts of quantums. Even if paid for drivers basically 300 hundred bucks for that set up is hard to beat for a 4x4. My buds was rock hard using them. Just wished id of gotten to sample the buds they produced. Theyre gone with lights. But next lights will for sure b led quantums. Thx ✌
 

grilledcheese101

Well-Known Member
I added a cheapo blurple in to take car of my lack of red/orange light. I kinda like it because it has a few ir diodes

This is my new light layout, havent got a reading off it yet but it obviously wont be any worse lol.

Hoping to get more or the same weight off 3 plants in 5 gals (instead of 4.5 plants).

Only plan on flicking it on come flower, but its about 150w draw w/ the fans

Woulda went with hlg qbs but the price just wasnt right for anything worth while and shipping it to canada. received_2332792343638320.jpeg Screenshot_2019-07-03-19-42-42.png
 

Frank Nitty

Well-Known Member
I added a cheapo blurple in to take car of my lack of red/orange light. I kinda like it because it has a few ir diodes

This is my new light layout, havent got a reading off it yet but it obviously wont be any worse lol.

Hoping to get more or the same weight off 3 plants in 5 gals (instead of 4.5 plants).

Only plan on flicking it on come flower, but its about 150w draw w/ the fans

Woulda went with hlg qbs but the price just wasnt right for anything worth while and shipping it to canada. View attachment 4359743 View attachment 4359744
Do what YOU like... It's different thats for sure... You really might be on to something... Only time will tell though... Keep us informed,me especially... Might try something like this just for S&G... XD
 

Frank Nitty

Well-Known Member
OK,so im about to buy a QB288 v2 RSPEC & slate 2 triple,can i run my QB288 v2 with these??? And if so,what is the driver that i would need???
 

Jqwerty1

Well-Known Member
I bet if you stripped the larfy bottoms off of that lady you'd see more energy dedicated to the tops! Pretty plant. I'd love to see a closeup of the colas
Yes, very slight increase in density and quality, if you pinch it off early. However the larf is still good somtimes. After harvesting the top i leave the larf to chill for about a week, while i do all the big trim work, bagging and the rest... My top buds go for a very high price, so high i think they would ban me off this forum lol. The larf i sell at a discounted price to my friends, its decent to smoke because its had some time to really flush and sweeten up but we use it a lot for cooking.
 

Jqwerty1

Well-Known Member
I'd love to see a closeup of the colas
This pheno doesnt have that super glossy icy trichome look like a lot of buds but people told me they like the high better. If i trim it and keep the light just right they buds do come out with a lot of trichs but its a hell of a lot of work. My veg is like nothing, i neglect them through the veg, i clone, transplant, top, and put it under 16/8 to get it to maturity and get it bushy. Then when it comes to the flower ive got 3 going at once every 20 days so i dont really have time to mess around with training. I use the whole line of GH dry nutes. Its all plug and play.
 

Attachments

Terps420

Well-Known Member
You can definitely run both types together with a CC driver.
I agree. V1's together and v2's together. Dont matter if added reds or not. I did own qb132's v1's & qb132's v2's. Wasnt to much of difference btween the two versions. Very happy with the buds they produced.. Just wished i didnt havta start all over again.. But i woodnt grow with anything but quantums. Thx
 

TerpyTyrone

Well-Known Member
i had 8 qb132's and 2 lrs-350-36 drivers up until 2 days ago... Long story.. But i suggest running them at full blast of 75 watts each especially in flower. At beginning of yr i bought 4 qb132's ( 4@ 2700k v1's & 4@ 3000k V2's) v1's was 99 & V2's was 109 bucks. Plus 2 my 2 lrs-350-36 drivers was 80 total. My one driver had cosmetic damage on case cause usps dented it shipn it to me. It workd fine but i emailed the company to tell them my driver had dent on case. They apologized and asked if i want a new one and ship mine back or they suggested i keep both drivers and theyd refund my total for drivers.. I kept the dented driver and took my 80 bucks back. That place treated me like gold. Trc electronics here in usa is where il shop in future. So i paid 225 bucks for 600watts of quantums. Even if paid for drivers basically 300 hundred bucks for that set up is hard to beat for a 4x4. My buds was rock hard using them. Just wished id of gotten to sample the buds they produced. Theyre gone with lights. But next lights will for sure b led quantums. Thx ✌
Why do u suggest running an say 75w or full blast?
My tent gets too hot currently with july high temps of 90 here.
I am in the last week of flower and am taking the tent down for maintenance/moving. I will restart in August when hopefully the tempa will be heading the other way....not too fast haha. I have outdoor too that needs to go the distance. Like Halloween hopefully! Hey I can dream. Its been a rainy cold start in the NE maybe it will stay warm for a while so the girls can finish.
 

Terps420

Well-Known Member
Why do u suggest running an say 75w or full blast?
My tent gets too hot currently with july high temps of 90 here.
I am in the last week of flower and am taking the tent down for maintenance/moving. I will restart in August when hopefully the tempa will be heading the other way....not too fast haha. I have outdoor too that needs to go the distance. Like Halloween hopefully! Hey I can dream. Its been a rainy cold start in the NE maybe it will stay warm for a while so the girls can finish.
Ok i didnt realize ur in a tent and in last week. I was just suggesting to run at max for max penetration on buds. But ya if in tent i see why u worry bout temps.. This was first yr in 20yrs i didnt do any outdoors.. Just cause im in town. Trying to get medical card so i am aloud to vrow 5 plants for myself. And ya im in illinois its been rainy hear too so far this summer. Usually we can grow up to november b4 it gets to cold.. Usually march-october is our grow periods here in southern illinois. 6months to go b4 its legal recreational. Cant wait but we wil b out of product. But good luck
 
Top