DIY with Quantum Boards

Black Thumb

Well-Known Member
@robincnn
@Stephenj37826

Hey, ive got 4 Elite QB96 v2 and a n hlg 320-54.
Im a little confused on how to wire these ?
There is only one positive and negative per board.
So do i run a splitter from the Driver and Split the positive into 4 lines and the Negative into four lines and power them like that ?

Anyone have a pic on these wired ?
 

HitemwiththeHine

Well-Known Member
Anyone have an idea when the V2's will be back in stock? It never seems like the Slates and the boards are both in stock at the same time.
I think the new boards are similar in voltage to the v1. Maybe you could just get 4 v2s, and arrange all on the inside or outside edges of your two slate 6s, so you'd have 2 of each on each driver. I'm not sure what the word is on mixing v1/v2 on the same driver?
 

Rocket Soul

Well-Known Member
I think the new boards are similar in voltage to the v1. Maybe you could just get 4 v2s, and arrange all on the inside or outside edges of your two slate 6s, so you'd have 2 of each on each driver. I'm not sure what the word is on mixing v1/v2 on the same driver?
Shouldnt be a problem with CC drivers, maybe a bit problematic with CV drviers.
 

pop22

Well-Known Member
Unless your running CO2, you probably have more light than your plants can use now.

I run 4 x QB 288 V1 on a HLG Slate 6 quad driven by a 480h-c2100B in my 5 x 5 tent. I get good results but still don't think that it is enough light. Does anyone have recommendations to boost my LED watts up to around 800-900?

For those that are not familiar with the Slate 6 it is one long heatsink with 4 boards side by side. I could easily fit a second one in there but I think that I would like something with the newer diodes.
 

pop22

Well-Known Member
That light gives you about as much light as a 1000 watt HPS. If you want it in old standards, your light puts out about 80,000 lumens. Your PPF is about 900+ anyone running more than a PPF of 750 should run CO2, it can make a big difference, up to 30% more growth. If you add more light, you'll definitely want to run CO2!

You think that 480W (max) in a 5 x 5 is too much light?
 

JayY2015

Well-Known Member
Will a QB 288 V2 320w kit really veg a 5x5 area? I am trying figure out what would give me the best veg coverage in a 4x4.
 
Top