DIY Passive cooling with PIN Heatsinks SST120 and SST140

The Dawg · Oct 23, 2016

sixstring2112 said:
yeah fuck it i'll try anything once,well cept for shitizens,

Oh So You Blame The Company For An Idiot Calling Up Wanting to Discuss Using their Product With A Schedule 1 Drug. Well That Does Leave More For The Rest Of Us That Are Responsible Growers . :roll:

sixstring2112 · Oct 23, 2016

i just like saying shitizen now,so i gotta play the part and hate on em lmao.who the fuck calls up looking for parts,gives address and cc # and says hey,by the way i grow pot,come steal it lololololool :eyesmoke:

The Dawg · Oct 23, 2016

sixstring2112 said:
i just like saying shitizen now,so i gotta play the part and hate on em lmao.who the fuck calls up looking for parts,gives address and cc # and says hey,by the way i grow pot,come steal it lololololool

OIC Said The Blind Man. These Youngens Need To Learn Just Because The Local Popo Turns A Blind Eye Doesn't Mean Everybody Does :peace:

miggaman · Oct 25, 2016

I'd kill to get my hands on some of these SST140's.... do I gotta wait for Nothern Grow Lights to stock them again? I will wait patiently if I must!

CobKits · Oct 25, 2016

as of this point doesnt look like robin wants to stock them. only massive community crying will bring them back so show your support

miggaman · Oct 25, 2016

Understood. I read somewhere else on here that one alternative is the MechaTronix---they have some good stuff for Vero 29's, but with too many pre-drilled holes for screws.

What's the biggest, baddest heatsink that MechaTronix has for the Vero 29's I plan to get? Or, are there other alternatives? Sorry for not researching this more thoroughly, but I think some regulars know the answer off the top of their stoned heads? I'm going for efficiency and passive cooling.

The plan: 3x (not 2x as shown in the figure below) Vero 29's in a spacetote, like this:

Gingerbee · Oct 25, 2016

http://www.starlite-led.com/heatsinks/

Never used myself but looks pretty sweet

CobKits · Oct 25, 2016

miggaman said:
I'd kill to get my hands on some of these SST140's.... do I gotta wait for Nothern Grow Lights to stock them again? I will wait patiently if I must!

Gingerbee said:
http://www.starlite-led.com/heatsinks/

Never used myself but looks pretty sweet

25 lb heatsinks!

Gingerbee · Oct 25, 2016

wow never looked at the 1200 watt specs lol

miggaman · Oct 25, 2016

Dang---I can't find any starlite heatsinks for sale on the internet. . . nor saw anything on their site that led to a dealer.

I might just go the heatsinkusa route and take the sinks to my local machinist for drilling/milling. No anodized aluminum for me :-/

Danielson999 · Oct 25, 2016

miggaman said:
Dang---I can't find any starlite heatsinks for sale on the internet. . . nor saw anything on their site that led to a dealer.

I might just go the heatsinkusa route and take the sinks to my local machinist for drilling/milling. No anodized aluminum for me :-/

Did you talk to @robincnn about his new splayed-fin heatsinks? Sounds like he should have some in soon.

miggaman · Oct 25, 2016

Danielson999 said:
Did you talk to @robincnn about his new splayed-fin heatsinks? Sounds like he should have some in soon.

Ah, I did see that post but asking him didn't occur to me! I'll do that. Thanks!

robincnn · Oct 25, 2016

Danielson999 said:
Did you talk to @robincnn about his new splayed-fin heatsinks? Sounds like he should have some in soon.

I will receive about 100 samples of splay design heatsink on Thursday.
Too bad I will be at Cannagrow Expo until next week. :bigjoint:

Next week will be super cool for DIY.
Limited Splay design heatsink will be available. perfect for high power COB and for all you who need to forget old fat 140mm and find new love with sexy splay designs. :hump:

More inventory coming mid November

Also Steves quantum boards will be available. These will be super efficient boards. 11.5x 7inches. However no predrilled heatsinks for now. You will need to visit Heatsink USA for their profiles and tap and drill like the old days. Hey it was fun.

These new spiral fluke taps make things so easy

sixstring2112 · Oct 26, 2016

so what is a steves quantum board ? got a couple empty bars needing something dif to cool them

NapalmD · Oct 26, 2016

It's about to get X-rated up in here

robincnn · Oct 26, 2016

sixstring2112 said:
so what is a steves quantum board ? got a couple empty bars needing something dif to cool them

Boards run 99-108 volts. At 250ma it is about 25 watts and boards 15C over ambient without heatsink. close to 200lm/w at board level. Just short of 3umol

Testing at 350ma now. at 350ma board at 20c over ambient and no heatsink. 35 watts at board 190lm/w

At 500ma about 182lm/w 50 watts
At 1050ma about 165lm/w 110watts
Numbers estimated from samsung online calculator

$75 per board + shipping. Available next week

nogod_ · Oct 26, 2016

What color temps?

robincnn said:
Boards run 99-108 volts. At 250ma it is about 25 watts and boards 15C over ambient without heatsink. close to 200lm/w at board level. Just short of 3umol

Testing at 350ma now. at 350ma board at 20c over ambient and no heatsink. 35 watts at board 190lm/w

At 500ma about 182lm/w 50 watts
At 1050ma about 165lm/w 110watts
Numbers estimated from samsung online calculator

View attachment 3815021
$75 per board + shipping. Available next week

robincnn · Oct 26, 2016

nogod_ said:
What color temps?

3000K 80 CRI

PSUAGRO. · Oct 26, 2016

Claiming 3umol/j from online tools and with mid power laid so closely to each other which kills the ppf/w......... will see I guess????my crow is on the plate :wink:

I'm still waiting on test results .................Maximizer, ^^^^"quantum" Samsung H series gen3 boards, anything.

patience isn't my friend..........lol

@Stephenj37826 .....any word from Colorado brother???????

Malocan · Oct 26, 2016

robincnn said:
Boards run 99-108 volts. At 250ma it is about 25 watts and boards 15C over ambient without heatsink. close to 200lm/w at board level. Just short of 3umol

Testing at 350ma now. at 350ma board at 20c over ambient and no heatsink. 35 watts at board 190lm/w

At 500ma about 182lm/w 50 watts
At 1050ma about 165lm/w 110watts
Numbers estimated from samsung online calculator

View attachment 3815021
$75 per board + shipping. Available next week

mehhh that is expensive :/

DIY Passive cooling with PIN Heatsinks SST120 and SST140

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member