dangerlow
Well-Known Member
I decided to build another grow room for another plant and wanted to do it on the cheap.
Materials Needed:
Home Depot
3X 7/16 in. x 4 ft. x 8 ft. OSB Sheathing $9.57 Each
14x 2 in. x 3 in. x 96 in. Premium Whitewood Stud $1.98 Each
2x 3-1/2 in. x 3-1/2 in. - 1/4 in Door Hinge $1.92 Each
1x 3 in. Coarse Yellow Combination Screws 72 per Box $7.98 Each
1x Grip-Rite #8 x 1-1/4 in. Coarse Screws 6.47 Each
1x 3M Super 77 16.75 fl. oz. Multipurpose Spray Adhesive $9.99 Each
4x Ready America Emergency Blanket $2.19 Each
1x Prime-Line 1-1/8 in. Chrome Drawer and Cabinet Keyed Cam Lock $5.47 Each
They delivered all of it to my home for free.
Take the plywood and cut a 3 foot by 7 foot piece out of the corner of one piece of your OSB.
Take 2x a 2x3's and cut one to 7'3" and the other to 3'. Then attach them to the OSB you just cut around the doorway.
Take the Door you cut out and attach a 7' piece of your 2x3 flush with one edge. Then mount Hinges onto face of the plywood on the side with the 2x3.
Take another sheet of OSB and cut it to 4'x4' for the top.
Take the Piece you have cut for the top and cut two 2x3's at 44 & 9/16th" and " and two at 47 & 9/16th" . Attach those to the panel you Just cut leaving 7/16th on each edge.
Cut hole in it for exhaust where needed.
Take your door and on the inside of it spray it with your spray adhesive. Then get your emergency blanked and stretch it as tight as possible so it is smooth on your door. Cut off the excess.
Take your door frame panel, top panel, and other sheet of OSB and do the same.
Then take a 92 & 9/16th" tall 2x3 and attach it at 4' from the corner of your garage or building area using your 3" screws.
Attach a 92 & 9/16th" tall stud to the conjoining wall at 47 & 9/16th" from the corner using your 3" screws.
Make sure these studs are level.
Place the uncut piece of OSB onto the outside surface of one of the 2x3's with your 1" screws.
Attach a 92 & 9/16th" tall 2x3 flush to the outside of the piece of OSB you just attached to the wall. Make sure it's touching your floor.
Attach the side of your plywood you didn't cut on the other 2x3 you attached to the conjoining wall on the outside of the 2x3.
Screw the top 1' remaining of the OSB you cut for the door to the 2x3 you attached to the other piece of plywood.
Cut a 2x3 so it sits in the corner of the wall at 92 & 9/16th" tall and attach it to the corner.
drop your top into the slot you have created.
Screw the top on using your 1" screws through the plywood into the studs mounted to the top.
Attach your door in the same place you cut it from using the hinges.
Cut a hole in the door and a install your lock.
There you have it, a poor mans grow room for $98.94 Delivered to your door for free.
There is one of two of my new box's
I made the two longboards leaning on it about 5 years ago.
Materials Needed:
Home Depot
3X 7/16 in. x 4 ft. x 8 ft. OSB Sheathing $9.57 Each
14x 2 in. x 3 in. x 96 in. Premium Whitewood Stud $1.98 Each
2x 3-1/2 in. x 3-1/2 in. - 1/4 in Door Hinge $1.92 Each
1x 3 in. Coarse Yellow Combination Screws 72 per Box $7.98 Each
1x Grip-Rite #8 x 1-1/4 in. Coarse Screws 6.47 Each
1x 3M Super 77 16.75 fl. oz. Multipurpose Spray Adhesive $9.99 Each
4x Ready America Emergency Blanket $2.19 Each
1x Prime-Line 1-1/8 in. Chrome Drawer and Cabinet Keyed Cam Lock $5.47 Each
They delivered all of it to my home for free.
Take the plywood and cut a 3 foot by 7 foot piece out of the corner of one piece of your OSB.
Take 2x a 2x3's and cut one to 7'3" and the other to 3'. Then attach them to the OSB you just cut around the doorway.
Take the Door you cut out and attach a 7' piece of your 2x3 flush with one edge. Then mount Hinges onto face of the plywood on the side with the 2x3.
Take another sheet of OSB and cut it to 4'x4' for the top.
Take the Piece you have cut for the top and cut two 2x3's at 44 & 9/16th" and " and two at 47 & 9/16th" . Attach those to the panel you Just cut leaving 7/16th on each edge.
Cut hole in it for exhaust where needed.
Take your door and on the inside of it spray it with your spray adhesive. Then get your emergency blanked and stretch it as tight as possible so it is smooth on your door. Cut off the excess.
Take your door frame panel, top panel, and other sheet of OSB and do the same.
Then take a 92 & 9/16th" tall 2x3 and attach it at 4' from the corner of your garage or building area using your 3" screws.
Attach a 92 & 9/16th" tall stud to the conjoining wall at 47 & 9/16th" from the corner using your 3" screws.
Make sure these studs are level.
Place the uncut piece of OSB onto the outside surface of one of the 2x3's with your 1" screws.
Attach a 92 & 9/16th" tall 2x3 flush to the outside of the piece of OSB you just attached to the wall. Make sure it's touching your floor.
Attach the side of your plywood you didn't cut on the other 2x3 you attached to the conjoining wall on the outside of the 2x3.
Screw the top 1' remaining of the OSB you cut for the door to the 2x3 you attached to the other piece of plywood.
Cut a 2x3 so it sits in the corner of the wall at 92 & 9/16th" tall and attach it to the corner.
drop your top into the slot you have created.
Screw the top on using your 1" screws through the plywood into the studs mounted to the top.
Attach your door in the same place you cut it from using the hinges.
Cut a hole in the door and a install your lock.
There you have it, a poor mans grow room for $98.94 Delivered to your door for free.
There is one of two of my new box's
I made the two longboards leaning on it about 5 years ago.