322special
Active Member
Heres the deal...by the way,thanks for stopn by...the deal...my tents in the s/w corner along the same wall as my window.giving me two options when watering...the main zip or the one zide chutethat you can peep thru...?
Second..leaving the main fully unziped and doing so stank up my room and that I cant have...leave with a couple and there kool but why tell them...stealth....
how to water 4 plants,the two closes to the chute arnt to bad,the other two I had to lean over....
After several rip fromm my SB I came up with this
What ur going to ne...
Pc of 1/2" white pvc tubing....i bought two 2' pc.
all parts listed below are 1/2" unless noted*
2 female adapters
1 45° elbow
1 adapter
1 Male adapter
1 Pvc valve
1 1/2" (npt) threat to 3/4 adapter
1 end cap..i belive it was 1" cap...taags gone
The parts needed...pic
You rearly dony need any glue on the pcs...the fit is so snug it doesnt allow water to zeep out..i did glue the male adapter to the canteen using a hobby brand super glue..worked fine?..every thing else is screwed or pushhed in to shape
We have seen the parts lay out and the male adpt on the canteen..now for the assembly..
If you want to use the wand with a garden hole simply by pass the female apadter screw on the canteen with a 1/2" to water hose adapter.so once you have that done cut a pc of pvc bout 5" long and slip in into the female end...once there slip the pvc valve at the other end,follwed by the pc of tubing left over from what you cut earlier
Now take ur adapter and conect a pc of what ever lenght pvc tubing you need ..i used a 18" pc.
Nex
t take ur 45° angle and continue building it up
Once ur angle is in place ad another pc of tubing...i chose a 8" pc and hook that up to ur angle.
Im doing this on my phone so im tryng to rush...dam keys to small...lol
Next we atach a female adaptor so we can screw the shower head on.
Take ur 1" end plug and drill small holes.or burn a pc or rod red hot then drive it thru
The 1/2 to 3/4 adapter is fited to the cap,using the 3/4 end of course
Second..leaving the main fully unziped and doing so stank up my room and that I cant have...leave with a couple and there kool but why tell them...stealth....
how to water 4 plants,the two closes to the chute arnt to bad,the other two I had to lean over....
After several rip fromm my SB I came up with this
What ur going to ne...
Pc of 1/2" white pvc tubing....i bought two 2' pc.
all parts listed below are 1/2" unless noted*
2 female adapters
1 45° elbow
1 adapter
1 Male adapter
1 Pvc valve
1 1/2" (npt) threat to 3/4 adapter
1 end cap..i belive it was 1" cap...taags gone
The parts needed...pic
You rearly dony need any glue on the pcs...the fit is so snug it doesnt allow water to zeep out..i did glue the male adapter to the canteen using a hobby brand super glue..worked fine?..every thing else is screwed or pushhed in to shape
We have seen the parts lay out and the male adpt on the canteen..now for the assembly..
If you want to use the wand with a garden hole simply by pass the female apadter screw on the canteen with a 1/2" to water hose adapter.so once you have that done cut a pc of pvc bout 5" long and slip in into the female end...once there slip the pvc valve at the other end,follwed by the pc of tubing left over from what you cut earlier
Now take ur adapter and conect a pc of what ever lenght pvc tubing you need ..i used a 18" pc.
Nex
t take ur 45° angle and continue building it upOnce ur angle is in place ad another pc of tubing...i chose a 8" pc and hook that up to ur angle.
Im doing this on my phone so im tryng to rush...dam keys to small...lol
Next we atach a female adaptor so we can screw the shower head on.
Take ur 1" end plug and drill small holes.or burn a pc or rod red hot then drive it thru
The 1/2 to 3/4 adapter is fited to the cap,using the 3/4 end of course
