dabz all day. what do you dab and dab with?

hooooo yah. Should just only buy these. Il check out the 5d in a minute just enjoying my new toy. It can handle way more than what I put. Super thick vapor I can actually dab more easier than coughing brains out. To then load up another bowl. Im such a junky.

You were right its just first class experience of dabs. Im all jacked. I was saying before Id just get small vapor that takes forever to dab it all. Just coughing a lot. Then the next bowl I just am mostly coughing.

Not that I do that all day. Yet. Just once end of day and this just enables me to dab twice as much. Beautiful lung fulls of clouds I barely even cough. Can just dab and dab and dab. It only takes a sec.

You beauty pressing some homegrown dry sift. Could of been bagged up alot better tbf. Think there was 10g of sift being pressed but can't actually remember, must of been good shit

I'm dabbing from a budget rig I got of etsy normally use my dr dabber but it's in storage at the mo

I write this as I sit on the shitter curling 1 out

I was expecting the 3d to boost my tolerance and usage. I been able to stay at my .7gs a day just fine. Its actually better, making better use of my meds. I used to take small dabs all day then a couple fattys end of day but like every 30mins.

Now I just take super fat dabs every 2 hrs because it literally keeps be high. Then .2gs in one hit end of day. So its the same just way way better than before. Before I wasnt satisfied but didnt know better.

Its really screwing me up lol my people know me so theyre like yea hes high as shit. I know myself too, I seriously was.

Solventless Blue Chemdawg Hash Rosin and Koko's Cookies Live Resin Carts

I just now looked up if anyone else has gotten rid of hiccups from smoking or vaping weed. Yup Im not the only one. I thought it was trippy thinking Im the only one it works for. I have to cough my brains out for it to work but it does. Every single time.

I didnt want to share that because I thought it was just me and people would think Im crazy. Well, crazier than I really am that is. Try it! Cigs give me hiccups weed cures it. Sometimes just a little bit of weed but for sure always works when I take a huge hit enough to make me cough hard for a minute.

Always pumped to press. Pun intended. Fire up the press! Got a quick oz to play with!

13% but more terpy a bitch to collect needs to cool down and still doesnt want to collect. Tasty as heck and potent. Appearence aint bad. Could be just a bad press but still 1% increase hand trimming. Not looking good, my last was 16% and that was a step down from 17%.

I was just panicking because I thought it was less than 10% like how. As long as its more than 12% Im happy as thats the lowest its hit. More reason to hunt for more but its alright, at least quality is great. Funny each clone performs so different so I jar it seperately.

I just TRIPPIN got to go to bed plants come first need wake up 6am to fill 6 buckets for 6 plants, 666. Im just now remembering its a average. You get more yield some presses and lose some on a lesser good run, bringing down the average overall.

Ive had a plant do 16% and some change, 17.7%, 19% on a couple clones since hand trimming. Well I hope its 15% or more, thad make a 3% increase and will just remember it can perform better.

On that note Il keep growing my new pheno Im testing even though its going poorly not getting along with my other pheno.

That was 34gs if to add this press which was only 1/5th of the plant so theres that, thats how she turns a frown upside down. I was harvesting 3oz of rosin each run so I know Im getting paid.

Ahh cant wait to weigh it! Must be more than 12%.

Was 4.71 but dabbed some so its 4.26gs here. 13.86% off 34gs flower. One press was 13% then 14.6% and lastly 13.4%. Overall 13.86%. So see how the actual yield can vary and you dont know what a pheno yields until pounds of it pressed. Only to still be random.

Still a 1.86% increase hand trimming vs bowl trimmer and this is still a lot. I would get 12.5% bowl trimming guarenteed and would get 1% added to overall yield of rosin making it as high as 14% but thats pure luck. More so 1% so like 13.5%? Im guessing now.

What Im getting at is I had to bowl trim 30oz to get that 1% that I already have here. It also increases quality a lot, the harder to collect due to being water like, the better. Thats terpene overload. Just sucks when overall yield is below 15% because I gots to work overtime collecting it off the damn paper.

Lastly Il say I just had a 3oz clone last run yield this dark but it was rough texture that eventually buttered some. Still rough though whereas this is already lighter color and bound to lighten up and butter a little. This is a good clone should get close to 3 quaters an oz but damn it could be an oz if it were 17%.

I harvested 3oz clone 16% got half an oz so damn. See every percent matters. I got a quarter oz from a 1 oz clone 19%. Looks like Im growing to break even lol barely get to save any. 5 runs to make enough to shut down. Vs 2 or 3. This stuff is real good though taste and potency wise its better than the 16% clone that was black like this.

Edit I mean the bowl trimmer adding 1% to overall yield from drysift pressing to dry sift rosin. I had to trim 15 to 30 oz to get a considerable amount added to overall yield.

Look at the yield I got from this one.

Need to take a moment to praise these jars I found on amazon. The bottom is smooth no nooks or crannys. Perfect for a fat oz of rosin which is about what one plant produces for me on a good day. Not oversized.

Ahh I got the harvest gitters. Would you harvest a plant that had to look real close to see whites and only in isolated areas? Its what Id say 98% red hairs. Sugar leafs pointing up today I saw. 8.5 wks. Looks like a big yielder.

Low on product could at least top it off to secure myself I mean damn shes mostly done literally. Then wait half a week and chop the other clones at 9wks full. One of them is behind but the other beside should be no hesitation to chop.

I might of delayed the delayed one by chopping this oz off her as the one beside is harder to spot white hairs. Oh and the plant I want to chop today even the lowest nug next to rootzone that decided to pop up after good lolipop all the way through.. Is mostly expressed and done which I like to keep on there just to gauge being finished growing.

That bottom bottom nug will be all red haired if you wait another week or two.

Ahh! Im starting to learm density. They will actually weigh heavier and have more hash with that bud. This one particularly just be waiting on less than an eighth of weight seems like. Seems like shes there bro.

Like three small areas which are nugs that I know wont get much bigger. One of those on a dominant cola somehow. Its an art determening when to harvest. Il say I know I can chop now and be happy question is should I..

Judging percent trichs is tough I just imagine mixing 10% pearlite in coco. Its hard to tell its 10% theres pearlite everywhere throughout it. Pistols are different though and feel like the percent logic applies there.

I tend to think its “mostly done” before it is but when its where this particulare clone is at oof. Id chop. Now its where a plant I had that I cut at 8wks amd was very happy with. Just half a week later. Sometimes its like that. This clone looked close then so I started on the other tents I was nervous about.

Then was like damn this aint ready. This one though damn, I looked close then and now, I didnt look close enough the other tent. This particular plant is good to chop. It was close then, its even more ready now. Just not 100% red haired. The other tent honestly could use 10wks while this one could go 9 or now, 8 wks and 4 and half days.

Gettin so fat makin me nervous. For 4 days later it grew so much got me double checking for whites and gettin harder to spot. Sugar leafs pointing up in here too. All 3 clones flipped same time. The power of lollipop wow.

Could very well be good enough with 9 wks full. Might even push pass that a bit be sure. I love trimming plants that are 100% done 5 white hairs or less. Just forget about them for a week. A skill to wait. I waited 8 wks why cant I go a couple more! I dont want to be that guy that doesnt let plants finish.

They look so damn good too. The mold is just pressure to chop, pm and budrot its hard to get and then be in this position. Im learning a lot as I go along like hey box fans might of been what made it work for budrot too even if your rh nears 50% often. If it goes higher it should be very brief and be scrambling to get it down or I screwed up.

Like a power outage waiting to get generator running. My ac unit rising rh like crazy while it gets settled in after a while not using. Getting more comfortable with these things. Theyre so healthy to push so let them. I had clones leafs fading rapidly Im thinking infected from gnat/aphid infestation as these are just going!