CREE LED Grow Panel growing

Ecosunlite CREE LED

Well-Known Member
I like the concept but the execution not so much. You do realize those plants look horrible on both sides right? Nobody wants to see yellow or blurple pics, take photos with the lights off and let's see what those lights do with your plants. Although, I don't think it's the light on either side that is the problem. Tip: keep your leaves on, healthy, and green if you want to utilize a growlight...
For those pics , our led with hps 600w , They are all from one grower who grow with it . we just put them together and post here . I see what you mean .
 

weed-whacker

Well-Known Member
what everyone wants to know is the exact bin of each of your diodes, the amount of each diode and the drive current of each diode

eg you have 2x cxb 5000k CB bin? what driver current? in parallel or series?

same question for each of the other diodes

I promiss you if you do not give that information on this forum your advertising dollars are wasted,

it's like anything you buy now, a car or computer you want to know what hardware you are getting not just it's top speed and that it can drive real fast

please answer questions if you want to sell
 

Ecosunlite CREE LED

Well-Known Member
what everyone wants to know is the exact bin of each of your diodes, the amount of each diode and the drive current of each diode

eg you have 2x cxb 5000k CB bin? what driver current? in parallel or series?

same question for each of the other diodes

I promiss you if you do not give that information on this forum your advertising dollars are wasted,

it's like anything you buy now, a car or computer you want to know what hardware you are getting not just it's top speed and that it can drive real fast

please answer questions if you want to sell
We use cree xpe 3w led red 625nm , blue 465nm , white 3000K 5000K , 700mA to drive .
COB CREE CXA 2540 CXA 3070 CXB 3070 CXB 3590 : 3000K 3500K 5000K are all used in our COBs .
1.6A 2.1A .
For COBs , Each cob with one driver , for cluster , parallel connection .
Thanks for your advice , we know that . People need to know the products ,they will think buy or not , I have car and I know that .
 

Ecosunlite CREE LED

Well-Known Member
Too much foliage ( leaves) your NOT gonna get much bud from this grow..probably very fluffy buds when done.. show plants again when they're done.!?
I take it your NOT replying to the questions posed..? Goodluck, yer gonna need it. ;-)
Gaz
That's one grower who use our led for growing , what they sent us which they think we can post and share , then we post .
 

Mullumbimby

Well-Known Member
@Ecosunlite - Dude, you are not getting it. Let me try to explain how this sort of thing works.
If:
you built a reasonable quality growlight case,
with 4 Cree CXB3070 COB LEDs that were carefully selected to provide a range of white light of the appropriate color temperatures and specified precisely the Cree 2, 3, or 5-step order code, (which unambiguously identifies the:
Nominal CCT
Minimum and typical CRI
Minimum Luminous Flux at 25 and 85 degrees C )
driven by any driver you like that could handle the required power characteristics of the Crees and came with a no-nonsense, 3-year warranty,
then:
a few of the characters on this forum would check the specs against the Cree XLamp CXB3070 LED Product Family Data Sheet.
If:
you got the specs right
Then:
Those characters would buy a couple of your growlights
They would test them
They'd get good results
They'd recommend your lights to everyone
You'd sell a shedload of lights
Everyone would be happy
Else
You'd get one more chance to get it right and we'd all start again
end if
Else
Your profile's 'Ignore' button will get more pokes than my bong's had tokes.
 

weed-whacker

Well-Known Member
@Ecosunlite - Dude, you are not getting it. Let me try to explain how this sort of thing works.
If:
you built a reasonable quality growlight case,
with 4 Cree CXB3070 COB LEDs that were carefully selected to provide a range of white light of the appropriate color temperatures and specified precisely the Cree 2, 3, or 5-step order code, (which unambiguously identifies the:
Nominal CCT
Minimum and typical CRI
Minimum Luminous Flux at 25 and 85 degrees C )
driven by any driver you like that could handle the required power characteristics of the Crees and came with a no-nonsense, 3-year warranty,
then:
a few of the characters on this forum would check the specs against the Cree XLamp CXB3070 LED Product Family Data Sheet.
If:
you got the specs right
Then:
Those characters would buy a couple of your growlights
They would test them
They'd get good results
They'd recommend your lights to everyone
You'd sell a shedload of lights
Everyone would be happy
Else
You'd get one more chance to get it right and we'd all start again
end if
Else
Your profile's 'Ignore' button will get more pokes than my bong's had tokes.
we have all tried to expalin this, its just another chinese led grow light with mystery spectrum and unknown diodes,

moving on
:wall:
 
Top