• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Cool Stealth Grow I built For A Relative

ruva

Well-Known Member
Damn I forgot to take pictures of one the most important parts, the outside. The cabinet is in her room, in the middle of two closets with sliding mirrored doors. It is about three feet up with a few drawers underneath.

+

The space is 22" across and 24" deep.It has 16 23 Watt bulbs. For exhaust it has a 6" inline fan that exits out the top right hand side into her closet and through flex ducting. Then points out the closet, as long as she leaves it open a crack. For intake it has a 4" inline fan at the bottom left hand side of the cabinet that comes from her left side closet, and will draw in fresh air from in her room, as long as she leaves that closet open a crack.
To keep light from cracking through the door I put weatherstrip along the edge of the door. I could still see a little light creeping through so I made a curtain out of the reflective insulation and put it in the front door opening. She just has to open the door and roll up the curtain when she wants to get inside. It keeps light out and the cabinet sealed perfectly.
To keep the ar circulating I hung two 3" fans from hooks. I installed hooks in 3 spots up the back wall so as she lifts the light she can reinstall the fans on higher hooks.

These fans are awesome for micro-grows guys. I also used them on my micro-grow and they worked perfectly. They take up very little precious space. You can get them at Target for like $8.00.

The 4 plants are:
2 Green Crack
2 Purple Erkle
 

yoitsslobo

Active Member
Looks nice man., light rack looks a little iffy though.is it sturdy? Nice work man ,plenty of cfls gr8 job
 

ruva

Well-Known Member
Looks nice man., light rack looks a little iffy though.is it sturdy? Nice work man ,plenty of cfls gr8 job

Its all good dude. Same set-up I used here and they worked flawlessly. I mean how sturdy do they have to be they are literally holding up a few ounces of lights. LOL
The light fixtures are fastened to the rods and the rods are fastened to the chains so they all arent just loosely hanging on each other if that is what you are refering to.
 

yoitsslobo

Active Member
Its all good dude. Same set-up I used here and they worked flawlessly. I mean how sturdy do they have to be they are literally holding up a few ounces of lights. LOL
The light fixtures are fastened to the rods and the rods are fastened to the chains so they all arent just loosely hanging on each other if that is what you are refering to.
True true.nice work my man.keep it up!! Rep+
 
Top