Club 600

now then guys.;.)..just a quick question,what do you guys think is gonna be the best strain for scrog from seed,i no clones are the best option but im wanting to do this from seed,some proven strains would be best as i dont want to just jump in and buy any old strain,has to be proven big yeilding sat dom,maybe 70-30 or something along them lines,thanks and peace out;.))

duchieman said:

That's why I'm growing such a long flowering strain with such sativa dominance in it. Since the MH bulb came and indoor growing took off all those tropical sativas disappeared up here, so after 20 plus years I think an extra 6 weeks, even once to see, is not that long. I too now think of all the seeds I scraped off my Led Zeppelin album.

Click to expand...

lol.

i forgot all about using those very handy album covers to clean and roll the reefer. there were some great covers. zep is my all time favorite. i used to fall asleep with zepplin 2 blaring through my 4 pound head phones.

i'm almost tempted to grow a long flowering sativa just to see if they are anywhere close to the great stuff but i'm not a patient man. i have an extra closet and light though. i'll think about it when i make my next seed buy.

Eeewwwwww......made in china.........just kidding....I'm sure they all are!!!!

spoad said:

now then guys.;.)..just a quick question,what do you guys think is gonna be the best strain for scrog from seed,i no clones are the best option but im wanting to do this from seed,some proven strains would be best as i dont want to just jump in and buy any old strain,has to be proven big yeilding sat dom,maybe 70-30 or something along them lines,thanks and peace out;.))

Click to expand...

bubblicious, not many phenos

Mr west, youv convinced me to make some oil for the first time. After some reading I think the quickest way to make some is with acetone. Im using 1/2 tsp keif handful of trim and a little scissor hash... just for fun guys, I have enough keif to play with otherwise I wouldn't have put it in
It's evaporating now and I'll let you guys know how it turns out....

well i checked my girls today and i think their trying to tell me something lol

hey guys how do you cope with the heat from a 600W? what sort of fans are you using? anyone in a small growroom i have a 3x3ft wide and 7ft tall and was wondering what size of extraction should i use and is there any other ways to help keep temps down? any info would be greatly appreciated thanks.

xbladex1984 said:

hey guys how do you cope with the heat from a 600W? what sort of fans are you using? anyone in a small growroom i have a 3x3ft wide and 7ft tall and was wondering what size of extraction should i use and is there any other ways to help keep temps down? any info would be greatly appreciated thanks.

Click to expand...

Id use a 5" ruck or something similer with an air cooled hood cool tube type thing. U need to extract that heat out

mr west said:

That hash oil lol, time to get melted

Click to expand...

hey,
I made has oil a while back.. all worked fine until i took the hot water from below.
It went so hard i couldnt get it out the glass tray... infact after using a razor blade to scrape it from the glass i couldnt get it off the razor.

any ideas what went wrong?

xbladex1984 said:

hey guys how do you cope with the heat from a 600W? what sort of fans are you using? anyone in a small growroom i have a 3x3ft wide and 7ft tall and was wondering what size of extraction should i use and is there any other ways to help keep temps down? any info would be greatly appreciated thanks.

Click to expand...

I'm in a 3x3x8 using an air cooled hood with a 530 cfm extraction fan. My temps usually run between 77 - 82 deg. If your not using an air cooled hood or cool tube your gonna run into a lot of heat issues. Before I went to an air cooled hood I was running hi 90's.

indecline said:

hey,
I made has oil a while back.. all worked fine until i took the hot water from below.
It went so hard i couldnt get it out the glass tray... infact after using a razor blade to scrape it from the glass i couldnt get it off the razor.

any ideas what went wrong?

Click to expand...

You over-dried it. A little liquid would loosen it.


cof

yummy !

fatboyOGOF said:

lol.

i forgot all about using those very handy album covers to clean and roll the reefer. there were some great covers. zep is my all time favorite. i used to fall asleep with zepplin 2 blaring through my 4 pound head phones.

i'm almost tempted to grow a long flowering sativa just to see if they are anywhere close to the great stuff but i'm not a patient man. i have an extra closet and light though. i'll think about it when i make my next seed buy.

Click to expand...

I'm looking for a strain that will flower like this. How long would you wait for this one?

Well, here are some pic's of the Widow Big Bud harvest.
Managed to get 4 of the 6 trimmed and racked late last nigh with 2 more to go this morning.

Dropastone said:

I'm in a 3x3x8 using an air cooled hood with a 530 cfm extraction fan. My temps usually run between 77 - 82 deg. If your not using an air cooled hood or cool tube your gonna run into a lot of heat issues. Before I went to an air cooled hood I was running hi 90's.

Click to expand...

Yeah I dont run cooled hood or cool tube, I have a fan blowing the heat away from the bulb and the bottom corner of the tent pinned open about 1 foot from the ground. I have a small fan sucking air from an open window.
I have temps from 75 to 85 depending on outdoor temps.

Problem being that cooled hoods can be pricey round here.

curious old fart said:

You over-dried it. A little liquid would loosen it.


cof

Click to expand...

How would i overdry it? take it off the heat and leave a little butane in it? surely not?

PUKKA BUD said:

Hi peeps!! thought i'd chuck some pics up of my G13 Haze uder my 600W last pics before the chop!!

Click to expand...

Nice

If you used butane to make it then you probably needed to add a little liquid to it after and let it sit for a few. It will absorb some of the liquid and become an oil again and then you're good to go.

Dezracer said:

If you used butane to make it then you probably needed to add a little liquid to it after and let it sit for a few. It will absorb some of the liquid and become an oil again and then you're good to go.

Click to expand...

wouldnt have worked, when it came to clean it i filled it with water, soap, washing up liquid, you name it.

nothing loosened it. had to throw it out.

whats the best substance to make it with? maybe the butane i used wasnt pure enough.

PUKKA BUD said:

Hi peeps!! thought i'd chuck some pics up of my G13 Haze uder my 600W last pics before the chop!!

Click to expand...

that is purely beautiful!

I haven't tried the butane method yet myself so was figuring it would be similar to other methods but I guess not, eh? I did the alcohol method and used 100 proof Vodka the first time with decent results and everclear the next with good results. Just takes longer since it needs to soak for long periods of time before straining and evaporating the alcohol off. Was killer shit though and I left mine thin enough to be put into drinks and stuff. Only evaporated a little of it enough to be smoked and that was so my neighbor could try it out.