Club 600
- Thread starter DST
- Start date
DST
Well-Known Member
I don't want to blow the DOGs trumpet, but I'll tell you one thing. In the Dam DNA are trying to flog OG#18 clones and no one is really interested, due to the low yield from them (a lot of people grow for money in the Dam.) DNA apparently lost their OG kush cut through a grow room bust a while back, and I have just donated one of my OG Kush cuts back to the Grey Area for them to develop and get the product back onto the market. The Headband is very rare, and now DNA(Reserva Privada - same people I think) are flogging some Sour Kush cross or something instead of Headband. The OG#18 is still a top line smoke though from what I have experienced.
EDIT, nice doggy!!!!
ghb
Well-Known Member
DST
Well-Known Member
Well they said that the 18 was the 18th plant out of hundred of OG's, etc, etc...but then I am not sure why people want the OG cut I have so much. I didn't give it to the creators, I gave it to the Grey Area, which sells a lot of DNA's weeds, but they are doing it through another grower....growing politics shmolotics. I am not really a believer in owning a strain. We are given these genetics by nature, no one else. Anyone who thinks they own a strain is a fukkin tool in my eyes. The OG Kush is also a fairly low yielder. I have got just under a couple of oz max from one of my girls in the past.
duchieman
Well-Known Member
I'd like to ask a question and I'd like to ask it here because you guys seem like nice, mature fellas who will answer kindly. I've been listening to you guys talking about Dogs now and I can't nail down what your talking about. I even checked the grow slang sticky and couldn't find it there. I don't know if it's your male plants or your working mothers, or what. So here it is...what's a dog? 
And ghb, here's me doggy.
Thanks, D
And ghb, here's me doggy.
Thanks, D
ghb
Well-Known Member
he likes to drool i bet!.
DOG is a strain of ganja my friend, if you go back to the previous page you will see its heritage explained.
The Headband is OG Kush x EastCoastSourDiesel. The DOG is a female Headband male herm flower crossed back onto the OG Kush (not the og#18!!!) The OG Kush is from DNA's OG Kush from a few years back (no longer available) as is the Headband from DNA bag seed that I bought in the Grey Area coffeeshop. It was the first Headband to be sold in Amsterdam
DOG is a strain of ganja my friend, if you go back to the previous page you will see its heritage explained.
The Headband is OG Kush x EastCoastSourDiesel. The DOG is a female Headband male herm flower crossed back onto the OG Kush (not the og#18!!!) The OG Kush is from DNA's OG Kush from a few years back (no longer available) as is the Headband from DNA bag seed that I bought in the Grey Area coffeeshop. It was the first Headband to be sold in Amsterdam
curious old fart
Well-Known Member
wally nutter
Well-Known Member
loving the dogs, heres a shot of mine when she was still really puppy puppy, ill get a more current of her later. shes like preteen pup now. o and her names sativa
dr green dre
Well-Known Member
dr green dre
Well-Known Member
I started a thread on advice for cooltubes , theres some good info on there when you get past the B.S, check it out - post this up-some one might have answer.ok 600 lil help!
so as those that follow my ramblings know ive had a smell problem for a while hahah BO...
ive had my setup like this CAN> COOLTUBE> COOLTUBE> FAN> VENT OUT. I spoke to the guy at the hydro store i shop at n he said its no where near as effective with the fan that far away from the filter thats why its not working as it should.
so ive bought myself another 5" fan and am now wondering the best way to go about setting it up.
if you look at my CAD drawing hehe... should i put the new fan driectly behind the filter and run it in line with the other before the 2 cooltubes.
Or run the cooltubes straight out of the tent with no filter and have a seperate line fro the new fan with the filter directly on the end and merge the two outlets to go out?
will it cause a pressure problem running the two on the same line? anyone have any input ideas it would be much appreciated. its going to be hard enough to get the things in there as the tents full at the minute.
cheers guys
Im no expert but nearly all were saying filter shouldnt be on cooltube line, Pull is better than pushing air and so on .. But for each thing there was someone saying the opposite..
https://www.rollitup.org/grow-room-design-setup/346523-whats-best-cool-tube.html
ghb
Well-Known Member
fans pull better than the push, that is a fact.
when dealing with cool tubes however, because you are using it to cool, it is better to have the fan pushing air through the cool tubes and out of the grow room, this prevent overheating of the fan and extends the life of it. having a filter on the end of your cool tube will reduce efficiency drastically as the air being removed from the light tubes is moving slower, installing a higher rated fan and filter will remedy this.
i am of the opinion that we don't need cool tubes here in the u.k as we are going in to winter (i could have done with one in the summer when it was 100+ in there!). i vote take off the cool tubes, get a bigger filter and double check all seals(i had a little split in the duct where the fan was sucking air out the room and it was sucking 50% filtered air and 50% unfiltered skunk air, needless to say it stank outside my house).
Don Gin and Ton
Well-Known Member
450 
im rocking 250
its been a stressful morning. half the girls had fallen over under their own weight. i pulled em all out repotted a couple of them and staked the pots up a bit. coco bloody everywhere..
im now running two lines one for the filter(24/7) and one for the lights on 15 on 15 off sucking ambient air from outside the tent. cant smell owt outside but its pretty windy. if i get a whiff when it dies down ill get the ozone genny on. order an 8 inch fan, the filter should be ample sized for the space the next size up is for thousands of square ft.
i have to say i would rather have one line like the pic youve drawn ghb. the ambient air also has the smell of the veg area in it which is not too bad but will be soon.
its a race against time now though as those girls are done, a couple have a few days maybe but chop day is sat!
im rocking 250 its been a stressful morning. half the girls had fallen over under their own weight. i pulled em all out repotted a couple of them and staked the pots up a bit. coco bloody everywhere..
im now running two lines one for the filter(24/7) and one for the lights on 15 on 15 off sucking ambient air from outside the tent. cant smell owt outside but its pretty windy. if i get a whiff when it dies down ill get the ozone genny on. order an 8 inch fan, the filter should be ample sized for the space the next size up is for thousands of square ft.
i have to say i would rather have one line like the pic youve drawn ghb. the ambient air also has the smell of the veg area in it which is not too bad but will be soon.
its a race against time now though as those girls are done, a couple have a few days maybe but chop day is sat!
Dezracer
Well-Known Member
SO, I was checking the voting results this morning after there's been 96% of pricincts reporting and Prop 19 only failed by 7.6%. That's a pretty slim margin to lose by so I think it gives extra hope for the Jack Herer version that's being lobbied already for 2012. Don't give up hope people.
Outdoorindica
Well-Known Member
I go filter>duct>cooltube>duct out>fan. My fan is at the very end of the line, and out side of my tent. It has about 8+ feet of ducting including the cool tube between it and the filter, no heat issues, and no smell issues. I think you should use what works best for you. Some would tell me I should have that differently, then I would reply with the question why? When it has worked without any issues at this point. Like ghb said, a higher rated fan/filter takes care of that, JimmyT was correct in saying a 450cfm+ should work. I use a 500cfm inline, so I dont have to worry about my filter slowing the air movement down, because thats not necessarily a bad thing with a fan that strong.
Don Gin and Ton
Well-Known Member
8 inch ordered coming tomorrow hopefully. 5 inch going straight back.
ZEN MASTER
Well-Known Member
thats usually how they do us.LOL.
Don Gin and Ton
Well-Known Member
haha the guy couldnt quite believe it wasnt working. should have both here tomorrow.
i really cant fault the guys in the hydro shop theyve taken back all the stuff ive bought that wasnt up to the job.
i really cant fault the guys in the hydro shop theyve taken back all the stuff ive bought that wasnt up to the job.
JimmyT
Well-Known Member
There's no problem having everything go through one "line" so long as your exhaust exceeds the amount of your intake (you know that already). The way I see it, using a 250 cfm fan will have to work extremely hard, which means it'll start making funky noises and eventually break down sooner than later. I use one fan to cool my to reflectors/bulbs and one fan to exhaust through my carbon filter. It killed me to have to purchase two but when you're using supplemental c02, there's really no other choice. I use these Soler & Palau inline fans. They're pretty bad ass IMO and not too expensive. Considerably low on sound too!
