Club 600

jigfresh · Apr 22, 2015

I think it would cost a fortune to send to Europe shishka. I'm sure I could make one, just need tools. I'm home now with access to all my tools. I never realized how much I use them. What all would I need to build them.... And speaking of tools.... What all would you guys bring if you had very limited space. I'm thinking drill bits, needle nose pliers, wire cutters, reg pliers, maybe my channel locks, a few screwdrivers? What else? Files? Shit it all sounds heavy, wieght limits and all.

jigfresh · Apr 22, 2015

I really appreciate the offer though.

DST · Apr 22, 2015

I reckon a hammer would be about all I needed, lol.......that's how I like to do DIY or as the Cloggies say. DHZ (doe het zelf), lol.....

R1b3n4 · Apr 22, 2015

DST said:
Need to sort me one of those air cloners, getting bored with jiffy pellets. What's the basic coup on materials for them?

look on ebay at the X-stream ones, from 12-105 site ones ranging from £40-100, i had the 12 site one n was getting roots on whatever i put in there in 14days or under, never had a single one not root in it, only a cheap one but does the job

giggles26 · Apr 22, 2015

and the heat is on...

Don Gin and Ton · Apr 22, 2015

50 ladies upcanned in 3 hours. in lights on in spain = me dripping mud off the end of my nose. I don't think i've done a decent days work in a long time my back's killing me. got my grow fix tho haha

served an eviction notice to this fella.

SomeGuy · Apr 22, 2015

Thought I would share with ya all too>>>

4x4 with 9-10gl vegging away. Get screens this week and flipped before next month.

Here is my other 4x4 at 6 weeks or so. go till 9wks

Bud Shots:
xxx og

Skunk #1 With strand of fabric cus we dont have hair that color.. LOL my white towel does though! I was wiping up a water spill.. so sticky there. Oh and the skunk.. I cant touch without REAKING! even after washing.

@DST Deep Psycosis

Dog

@genuity Fireballs

Pre98 bubba

Dezracer · Apr 22, 2015

Everything is coming up aces for you SG.
My grow is a bit of a mess right now. My harvest was stinking up my house so I had to put the buds in the flower room to dry. This means the plants in veg will stay there for another week before flip. They're already too big so I'll have to cut them back quite a bit and take more clones from them when they go into the flower room.

Normally I wouldn't trip on the smell but my mother in law is picking up my kids this week and I don't want the house to smell like weed when she comes over.

papapayne · Apr 22, 2015

Flaming Pie said:
Check your plants man. I think I may see pm.

Yea I been treating the veggers with neem and phosphoric acid, and the flowering plants are getting babied through with apple cider vinegar. Seems like every damn flower cycle I see it towards the end. I suspect its in the walls and carpet along with the black and brown mold. Sulfur burner is in my future I think

Flaming Pie · Apr 22, 2015

How many circulation fans are you running and do you have a dehumidifier?

Also green cure is good for killing and prevention. 2 circulation fans on top of canopy and two below have helped me avoid recontamination.

DST · Apr 22, 2015

R1b3n4 said:
look on ebay at the X-stream ones, from 12-105 site ones ranging from £40-100, i had the 12 site one n was getting roots on whatever i put in there in 14days or under, never had a single one not root in it, only a cheap one but does the job

cheers lad. I guess I could do a diy but unless you can make one with a hammer it's probably not going to work, lol.

shishkaboy · Apr 22, 2015

DST said:
cheers lad. I guess I could do a diy but unless you can make one with a hammer it's probably not going to work, lol.

I dont think the shipping would be too bad.
But I really dont know. I use a drill, pvc cutter, drill bits and some silicone
@Don Gin and Ton no dome needed at all.
@Mohican gotta present for ya brother. Hit me up.
I cant keep my eyes open, the jet lag is real.

SomeGuy · Apr 22, 2015

Dezracer said:
Everything is coming up aces for you SG.
My grow is a bit of a mess right now. My harvest was stinking up my house so I had to put the buds in the flower room to dry. This means the plants in veg will stay there for another week before flip. They're already too big so I'll have to cut them back quite a bit and take more clones from them when they go into the flower room.

Normally I wouldn't trip on the smell but my mother in law is picking up my kids this week and I don't want the house to smell like weed when she comes over.

Thanks Dez! I just need to up my yields. I am thinking of doing an automatic bottom fed smart pot based on the Alaska bucket idea. That and adding coco to my medium.

Sorry man. LOL! I understand about the need for some stealth. I see quite a few guys dry in their grow areas with lights going etc.. I doubt it would really hurt it for a week. Take care man. Hope this week ends well for ya!

jigfresh · Apr 22, 2015

I hear you on the jet lag.

in November I crossed 13 time zones and had a 14 hour layover I which I couldn't leave the airport. That shit sucked!

Dezracer · Apr 22, 2015

SomeGuy said:
Thanks Dez! I just need to up my yields. I am thinking of doing an automatic bottom fed smart pot based on the Alaska bucket idea. That and adding coco to my medium.

Sorry man. LOL! I understand about the need for some stealth. I see quite a few guys dry in their grow areas with lights going etc.. I doubt it would really hurt it for a week. Take care man. Hope this week ends well for ya!

My light is off. I sprayed the flower room down really good and left the light off for a couple of days and the door open so things can air out. Then I hung my buds in there to dry.

Today has turned out shite so far. My helper is stuck at his place dealing with his ex so I'm sitting at my house waiting for him so we can go work. It's almost noon here now so I'm stressing a bit.

AlphaPhase · Apr 22, 2015

Giggs, I think you mean dynagro KLN (that's the rooting hormone i think and protekt is the silica)

I ordered a premade aeroponic manifold built for a 5 gallon bucket and I already had a bucket and a pump. Screwed the manifold into the pump, cut 1 7/8" drill bit to cut the holes for the net pots (make sure you cut the hole a little smaller the the OD of the net pots or it will fall through). When I built bigger ones I used totes and I think it's 1/8" drill bit to drill the holes for the sprayer's but not sure. I used the 360 degree sprayers and put one every 4". You can fit 24 2" netpots in a standard size tote.

This is the most recent manifold I bought, it was $21.50 on ebay free shipping, but you can build one for $10 I would imagine

shishkaboy · Apr 22, 2015

I was able to get 32 instead of 20, from looking at SG's design plans in Mo's thread a while back.
For my space it was a leap ahead. Now I can veg in my 2 gals for a few weeks before flowering, game changer!!!

SomeGuy · Apr 22, 2015

Dezracer said:
My light is off. I sprayed the flower room down really good and left the light off for a couple of days and the door open so things can air out. Then I hung my buds in there to dry.

Today has turned out shite so far. My helper is stuck at his place dealing with his ex so I'm sitting at my house waiting for him so we can go work. It's almost noon here now so I'm stressing a bit.

Bummer! Early is best. Gets it over with. Good luck dez!

SomeGuy · Apr 22, 2015

shishkaboy said:
I was able to get 32 instead of 20, from looking at SG's design plans in Mo's thread a while back.
For my space it was a leap ahead. Now I can veg in my 2 gals for a few weeks before flowering, game changer!!!

Which plans did I post?. Lol. Glad it helped either way. A

papapayne · Apr 22, 2015

Flaming Pie said:
How many circulation fans are you running and do you have a dehumidifier?

Also green cure is good for killing and prevention. 2 circulation fans on top of canopy and two below have helped me avoid recontamination.

I have a 60 pint dehumidifier. humidity stays around 35%. I have 2 12 inch box fans in there. and a 8 inch exhaust. and a 10 inch oscillating fan

Club 600

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member