Club 600

Don Gin and Ton

Don Gin and Ton

Well-Known Member
lmao dead spot under his hair maybe....

shwag :spew: monkey matting. the last bit of bush( uk term ) i saw i couldn't even taste weed. it was like someone burnt hair in the joint. no high and half the bag no actually 3/4 of the bag was seeds lol. desperate times call for....... not smoking that shit. lol.

so 600 my clones keep well moulding before they root. I've got the vents open max and still they mould. I unplugged the heated bit to try and lower the RH but still lost a couple this morning. I'm going to try rooting powder and tiny pots with the dome over and no heat mat, next. it's driving me mad. i lost 11 of 12 cuts last time in jiffy pellets with the same thing. the main shoot wilts and turns to mush then the rest of it slowly does the same.

going to knock up another dwc cloner today and do them that way.
 
Guzias1

Guzias1

Well-Known Member
Hey! Bassman, Horndog, Whodat, hydrogp, DST, jigfresh, and anyyyyyy other fellow members out there!

what is your input on flushing towards the end of flower with a soil?

i have about 3 weeks give or take left on a strain.. Ive had four runs with her so far..

first run. pretty rough, small buds, started off real hot on food, so i quit the feed cycle about 1 month into flower. , lost many leaves real early, turned purple pretty early as well.. finished a little over 8 weeks. temps 58-78
2nd run, better feed, decent size buds, didnt really loose too many leaves the entire cycle, experimented by dropping plants 2.5 feet away from light for final 10 days (from 10 inches), (didnt like this idea) plants took 10 weeks. temps 59-80
3rd run, all test. no feed entire cycle, plant lost manyyyy leaves really early, finished flower under 8 weeks. made excellent bho :p
currently on 4th run.. temps 61-82
I started 24 hour dark on 2/15/13 . they showed bud sites in under a week, thats when i gave first feed. feed/water/water/feed/water/water cycles.. SO, now onto my question when do you guys pull the plug on feed? ooooooooooooo, or do you add your TEAS?


​would love to hear how you take the final lap, thanks!

this picture shows my plants at week 7

order:
1sr run
2nd run
and 4th run
 
budolskie

budolskie

Well-Known Member
shit that like don m8 iv had sum in the prop under the leds be 3 weeks tomorow and the roots are just starting thats only tiny i had to rip the cube open to make sure cos the rest of mine we just pulling out rotted
 
Don Gin and Ton

Don Gin and Ton

Well-Known Member
Rasc and Bud,

I just don't know where i'm going wrong. could be old clonex, too high RH in the prop i dunno. like say i'm off to own to raid the tupperware departments and see if i can get owt suitable. I've got airstones to play with and a new pump so it's game on.
 
budolskie

budolskie

Well-Known Member
that was my first time of taking clones like and i wana build a cloner so once i have sum in the wilma i will be to get clones ready for it soon as they done, see what i can do with this wilma and i might buy a the normal 4 pot 1 for my little cuboard where the soil is going
 
rasclot

rasclot

Well-Known Member
Don Gin and Ton said:
Rasc and Bud,

I just don't know where i'm going wrong. could be old clonex, too high RH in the prop i dunno. like say i'm off to own to raid the tupperware departments and see if i can get owt suitable. I've got airstones to play with and a new pump so it's game on.
Click to expand...
Is ur clonex out of date? I thought high RH was good for cuttings I try n keep mine high as! I clone with the simplest things a tray of root riots a prop a 125w cfl bulb resting on the top of prop n a spray bottle usually takes anything from 1-3 weeks Probly would be quicker with a heat mat :) Ras
 
DST

DST

Well-Known Member
In soil I wouldn't really bother with flushing. I just make sure that the last week they just get given water. It's such a waste of water flushing like 3-4 times the size of your pot, and really I don't think it actually flushes out everything in the soil, otherwise you would just be looking at a pile of roots in a pot and all the soil would be washed away. Soil is made up of composted veg and as such, thats where the nutrients are held. Or that's what I figure.

So yeh, flushing is for toilets.......(or hydro based grows.)


Guzias1 said:
Hey! Bassman, Horndog, Whodat, hydrogp, DST, jigfresh, and anyyyyyy other fellow members out there!

what is your input on flushing towards the end of flower with a soil?

i have about 3 weeks give or take left on a strain.. Ive had four runs with her so far..

first run. pretty rough, small buds, started off real hot on food, so i quit the feed cycle about 1 month into flower. , lost many leaves real early, turned purple pretty early as well.. finished a little over 8 weeks. temps 58-78
2nd run, better feed, decent size buds, didnt really loose too many leaves the entire cycle, experimented by dropping plants 2.5 feet away from light for final 10 days (from 10 inches), (didnt like this idea) plants took 10 weeks. temps 59-80
3rd run, all test. no feed entire cycle, plant lost manyyyy leaves really early, finished flower under 8 weeks. made excellent bho :p
currently on 4th run.. temps 61-82
I started 24 hour dark on 2/15/13 . they showed bud sites in under a week, thats when i gave first feed. feed/water/water/feed/water/water cycles.. SO, now onto my question when do you guys pull the plug on feed? ooooooooooooo, or do you add your TEAS?


​would love to hear how you take the final lap, thanks!

this picture shows my plants at week 7

order:
1sr run
2nd run
and 4th run
Click to expand...
 
HydroGp

HydroGp

Well-Known Member
Ive been trying to clone for awhile now. Thought i was killing em cause of to low temps 19-24celsius. But then i saw on the clonex expires 07/2011. My Clonex is to old and i actually got it from a buddy who might even have contaminated the container. Have any of yall had succes with using honey? Ill have to try that.

Guzias1 flush. When i think there is about 14 days left. I feed less and less nutes for a week until i only use mineral water for the last week. I noticed when just trying to flush with clean water they seem stunted and dont drink any water for 48hours. But by giving less over time they seem to cope better. Thats just how i do. But you cant really count on my answer as i am in hempys. 80/20 Perlite/Soil or no soil at all. :) Seems like when the plants are big and strong they finish up the res before the top soil layer is even dryed out. So im trying 100%Perlite on all my new girls for next run.

My Blue mammoth is starting to turn....... Blue ! :D Whaha
 
rasclot

rasclot

Well-Known Member
Thought that! I had a problem with my pk13/14 a while back it was a year out of date n reveged my budding plants 3 weeksb4 harvest :( always check the dates ;) Ras
 
HydroGp

HydroGp

Well-Known Member
lol Don :) Guess they dont make a date for fun ;)

I just made a bong mix, and thought it would be a fun thing to share. I know we might not do things the same. I have friends who visited Amsterdam and they just put in fresh cigarettes. Nicotin and all. Yurk i couldnt smoke that. This is how i do.

If it is good hash. I use 04.g/cigarette. Better(Dont happen that much)less. Worse more.
IMG_1263.jpgIMG_1264.jpg
After crumblin hash to pieces. Put cigarettes in pot on high heat and when it starts smoking just a tiny bit make the tobacco jump up and down. Kepp this on for a couple of minuttes. Most people in DK check with the nose sniffin the smoke to see if it is ready. But i look into it and if my eyes hurt then there is still nicotine.
When the tobacco is ready, pour on the crumbled hash and mix it good(In the pot so you get a good heat mix). You can see on my pot i have made a couple mixes ;)
IMG_1266.jpg
IMG_1268.jpg
And that is a Danish bong mix! Hard airy chunky! How do you do it?
 
DST

DST

Well-Known Member
It's funny you showed this Hydro, this is such a common way for people to smoke in the bar I use to go to. It was one of my fave bars in Amsterdam, apart from the fact is was run by Danish/Dutch (and still kind of is) Hells Angels. They had great Happy Hours with beer for 2 euro a pint and you could smoke there as well. Then I started to get bad stomachs from the beer and then when the smoking ban came in they made a goldfish bowl smoking room and it was just horrible in there, as well as their beer increasing in price and various other things. But all the dudes in there toasted their tobacco. Tobacco is definitely a European and UK thing in general...me I avoid it as well. If you even put toasted tobacco in my bong there would be words said:)
I must say, some of the best blocks of hash I have seen where brought down by a Danish guy I knew when I first moved here. It was like the old school, sweaty top lip Moroccan I use to get in Scotland.
 
HydroGp

HydroGp

Well-Known Member
Then how do you get the hash to burn prober? Hash burns long, and i dont like to inhale to much from the lighter. With a good bong mix it is lid in no time.
 
HydroGp

HydroGp

Well-Known Member
Great story DST. I was actually hoping you would contribute with a tobacco story :D Hells Angels everywhere lol. I would never put stuff in others pibes. Do to others as you wish others will do to you. That being said i would deffinetely love a smoke session other than what i am used to, combined with the smoking adventures of the 600's damn thats a 4/20Perfect for me. I have a old hippie/Biker in the familie. I only see him once a year at family gathering. But it always ends up being such a great time. He got the greatest stories about trips to Marocco and sleeping on tons of hash :) And he also seems to have hash at a quality normal people cant get :)
 
DST

DST

Well-Known Member
Just uploading a video of me doing a hash bong, lol.....

going to make a sarmie and I'll be right back. 15 mins for vid to upload.
 
You must log in or register to reply here.
Top