Club 315w lec

MichiganMedGrower

Well-Known Member
I think going to buy 2 of the 630s with those air cooled hoods for my 4x8. Just run a carbon filter pulling through both to exhaust out the tent. Sound good? Should I go 6" filter?
I havent used air cooled cmh but I set up my old 4x4 with 600 w hps with passive bent duct light proof intakes and a 6" inline fan exhausting from the carbon filter at top of tent through air cooled reflector and out the top and out a stealth window board to outside.

You may need 2 fans one to pull through the filter and 1 to help remove exhaust from the room. Or air conditioning. Cooling 1200 watts may need more help. If your intake air is low enough it all can work.
 

rkymtnman

Well-Known Member
I think going to buy 2 of the 630s with those air cooled hoods for my 4x8. Just run a carbon filter pulling through both to exhaust out the tent. Sound good? Should I go 6" filter?
i would almost think you could just exhaust the heat from the top of the tent and skip the air cooled hoods. but it would suck if i was wrong and you'd be stuck with the wrong reflector set up.
 

MichiganMedGrower

Well-Known Member
I needed my ac hoods in summer but in winter here I could just unhook the exhaust and exhaust the open tent and take off the glass and just run it open. That was with 2 600hps in a small bedroom.
 

ThaMagnificent

Well-Known Member
I havent used air cooled cmh but I set up my old 4x4 with 600 w hps with passive bent duct light proof intakes and a 6" inline fan exhausting from the carbon filter at top of tent through air cooled reflector and out the top and out a stealth window board to outside.

You may need 2 fans one to pull through the filter and 1 to help remove exhaust from the room. Or air conditioning. Cooling 1200 watts may need more help. If your intake air is low enough it all can work.
2 inline fans it just 1 and a booster? 2 6" inlines?
 

MichiganMedGrower

Well-Known Member
2 inline fans it just 1 and a booster? 2 6" inlines?
I knew that sounded confusing.

2 6" fans exhausting the room through the hoods and out 1 6" hole. And 1 other 6"exhaust out on the other side of the room now that I have the open 315 added in the room.

The second exhaust port is newly added to handle the additional lamp or more if I need.
 
Top