Hi everyone,
I'm new to the indoor community but have been growing outdoors for a while. I'm planning on using a spare storage closet under my staircase for a stealth grow. The useable size of the room is 1.5x1m and 1.5m tall.
My only issue is that the entire thing is solid concrete (walls, floor, and ceiling), thus my only way to vent the closet is under the door. I was thinking of 3d printing custom intake/outlet ducts that will force air in/out of the 800x12mm gap under the door. The area outside the door is well ventilated though, and the fan I plan on using is rated to 350m3/h (210 CFM), but i expect this to be much less due to it having such a small gap to circulate the air through.
I am planning on buying 10x SI-B8U463B20WW and 2x Mean Well ELG-240-C1050B to make 2 series strings for 480W of LEDs and about 53000 lux on max power. I plan on automating the entire thing with a raspberry pi.
I would really appreciate your input and any ideas.
Best Regards
I'm new to the indoor community but have been growing outdoors for a while. I'm planning on using a spare storage closet under my staircase for a stealth grow. The useable size of the room is 1.5x1m and 1.5m tall.
My only issue is that the entire thing is solid concrete (walls, floor, and ceiling), thus my only way to vent the closet is under the door. I was thinking of 3d printing custom intake/outlet ducts that will force air in/out of the 800x12mm gap under the door. The area outside the door is well ventilated though, and the fan I plan on using is rated to 350m3/h (210 CFM), but i expect this to be much less due to it having such a small gap to circulate the air through.
I am planning on buying 10x SI-B8U463B20WW and 2x Mean Well ELG-240-C1050B to make 2 series strings for 480W of LEDs and about 53000 lux on max power. I plan on automating the entire thing with a raspberry pi.
I would really appreciate your input and any ideas.
Best Regards