Clone catastrophe

mobone · Feb 9, 2019

Took my clones a couple days ago, and now I've learned they need to be well watered before taking them. They started wilting almost immediately. The ones on the left seem to be trying to perk up

I do have a humidity dome, just took it off for the pic

Can't decide if I should give them a few more days to pull through or just scrap em and take new ones.

Way2-High · Feb 9, 2019

Oh wow they do not look happy! Would be surprised if they make it.

mmjmon · Feb 9, 2019

They might pull through. How many days so far?

mobone said:
Took my clones a couple days ago, and now I've learned they need to be well watered before taking them. They started wilting almost immediately. The ones on the left seem to be trying to perk up

I do have a humidity dome, just took it off for the pic

Can't decide if I should give them a few more days to pull through or just scrap em and take new ones.

xtsho · Feb 9, 2019

Are you misting them?

mobone · Feb 9, 2019

I have not been misting them. Figured 90 percent humidity was sufficient.

I cut them on Thursday mid day. Put directly into clonex solution and entirely soaked cubes.

Palmerrdgrower · Feb 9, 2019

mobone said:
I have not been misting them. Figured 90 percent humidity was sufficient.

I cut them on Thursday mid day. Put directly into clonex solution and entirely soaked cubes.

If you can take more it would be great but hold onto them for a few days before chucking them

NGA · Feb 9, 2019

Some strain react funny like that ,they will probably be fine

mobone · Feb 9, 2019

Palmerrdgrower said:
If you can take more it would be great but hold onto them for a few days before chucking them

Yea I’ll be cutting/topping more anyway. I’m just using these to determine sex.

Made the thread to just see if people thought they’d pull through. We’ll see! I’ll let them try to live for about a week.

Will post update

WeedFreak78 · Feb 9, 2019

If it's not a big deal I'd just cut new ones. Once they lose turgidity, it's hard for them to come back without roots. I'd also cut off those huge lower fan leaves next time.

https://en.m.wikipedia.org/wiki/Turgor_pressure

xtsho · Feb 9, 2019

WeedFreak78 said:
If it's not a big deal I'd just cut new ones. Once they lose turgidity, it's hard for them to come back without roots. I'd also cut off those huge lower fan leaves next time.

https://en.m.wikipedia.org/wiki/Turgor_pressure

I agree mostly. I don't clone much anymore but when I did I saved some cuts that looked pretty bad.

mobone said:
Yea I’ll be cutting/topping more anyway. I’m just using these to determine sex.

Made the thread to just see if people thought they’d pull through. We’ll see! I’ll let them try to live for about a week.

Will post update

Mist them with plain water. Straight tap is fine. In fact the chlorine in the water will actually help with sterilizing and preventing rot.

JohnDee · Feb 9, 2019

Hi Mobone,
I've been using a method called the two cut method for several decades now. Initially, make the cutting and stick it in a container of water.
Prevention of wilting depends on steps done at this time.
Once you have your rockwool or jiffy cube ready...pull a cutting, cut off the bottom at an angle, make a few thin slices along the stem (for root chemical absorption)
Roll it in powdered rootone and slip it into hole in medium. Pinch around the stem.
Keep it warm and humid. Should have roots in a week.
JD
PS the ones in picture are about 4 days old. No dome needed.

mobone · Feb 9, 2019

Noted. I only have rooting gel at this time but I’ll do the other steps. Thanks!

JohnDee · Feb 9, 2019

mobone said:
Noted. I only have rooting gel at this time but I’ll do the other steps. Thanks!

I actually don't think the cloning product makes much difference. I like the powder because it lasts longer.

Just be super careful to not let clone stem to be exposed to air for too long. Transpiration can cause an air bubble to be sucked into stem. Causes vapor lock like with a gas line.
JD

med4u · Feb 9, 2019

I do same as jd....also remove the lower big sink leaves...not needed for root growth....should perk up overnite...keep the dome on em keep em moist but not soaked
G' luck

Skoal · Feb 9, 2019

Cut clone. Put in water. Dip in cloning powder and plant. That’s it. Keep misting the leaves and have wet soil.

Where’sthecurve · Feb 9, 2019

Ya those look like they will be just fine. Maybe if those bottom fan leaves could have been completely removed and a little mist They would have some more vigor. They are nice cuts though.

mobone · Feb 9, 2019

Do we think I should make these cuts in the stem on these current ones or just leave them as is

Where’sthecurve · Feb 9, 2019

Just leave them now. If your talking about the slit in the stem then dunk in powder , no. If your asking about snipping off those giant suckers on the very bottom. Yes , carefully not to move the stem around and loosen any root starting to form.

Coloradoclear · Feb 9, 2019

mobone said:
Took my clones a couple days ago, and now I've learned they need to be well watered before taking them. They started wilting almost immediately. The ones on the left seem to be trying to perk up

I do have a humidity dome, just took it off for the pic

Can't decide if I should give them a few more days to pull through or just scrap em and take new ones.

I have to ask this question: .We're these taken off of a healthy plant?

BostonBuds · Feb 9, 2019

I would leave them alone out of direct light. I recently had a plant pop back after transplanting it and it looked like it was going to die.

Clone catastrophe

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Attachments