cap fan speed controller question

So I have the cap day/night fan controller

http://hydrobuilder.com/day-night-adjustable-fan-speed-controller-15a.html?dzid=csegps_CAVSC-DNE&gclid=Cj0KEQjwidKiBRCevbT6yeqPrJQBEiQA1iM2WfVbFkBAkhWaNF8i1cZsl5gd-ge7HNJp13s17y5C2ykaAk3u8P8HAQ

When I plug it in and set the temps the power button is green but the on button flickers on and off real fast yellow in all the other pics I have seen it is green . Also the fan barellly runs will that over heat my fan? It's a 6" can fan rho

Any insight would be appreciated!

Those are not designed for use with inline fans AKA Brushless fans. should return and get a varic controller or risk fire and dmage to ur fan. The CAP is made for squirrel cage types.

Sire Killem All said:

Those are not designed for use with inline fans AKA Brushless fans. should return and get a varic controller or risk fire and dmage to ur fan. The CAP is made for squirrel cage types.

Click to expand...

Aha I figured I immediately disconnected it I'd rather run full speed than burn up my fan lol

I use a Variac with a dual stat temp/humidity switch spliced into the line. It works great and allows me to have the fan kick off if the temps and humidity go below the levels I set.

http://www.amazon.com/dp/B00336G1ME/?tag=googhydr-20&hvadid=43218319357&hvpos=1t2&hvexid=&hvnetw=g&hvrand=10903717508359239002&hvpone=&hvptwo=&hvqmt=e&hvdev=c&ref=pd_sl_599dwg332i_e

Super easy to wire up

hbbum said:

Super easy to wire up

Click to expand...

Comeon, use a proper fitting inyour knockouts. :/ that's some scary wiring. Junction should be boxed....

SnapsProvolone said:

Comeon, use a proper fitting inyour knockouts. :/ that's some scary wiring. Junction should be boxed....

Click to expand...

a f-kup plug wouldn`t hurt in the open hole either.

Open hole is where the sensors are. The junction is boxed and bolted to the unit, but the pic is just while I was wiring it.