Bulkheads on the cheap.

So i set up a RDWC using uniseals thinking i could get away with it but i was wrong. After a couple of failures on the dry run and a couple of failures on tge silicone run i finally decided to go with bulkheads and man are they proud of them. I was able to find 2" for 6 bucks which is way better than the 30 bucks i was seeing primarily. Here's the link.

http://www.aussieglobe.com/

Current culture bulkheads are worth the extra few bucks.

DeepWaterDean said:

Current culture bulkheads are worth the extra few bucks.

Current Culture UC Spin Tight Bulkhead 2 in

Current Culture UC Spin Tight Bulkhead 2 in (48/Cs)

www.zenhydro.com

Click to expand...

Not really, those have no threads at all and once you glue pvc/abs to then, they cant be used for anything else really unless you build your system with a ton of unions. It's much easier to use 2" threaded Male adapters to screw I to the bulkhead rather than glue.

amazon dude. 2" aren't needed, 1.5" do great. Square buckets as well and your guaranteed no leaks. Depends on a few factors that the trolls will bring up, but those concerns can me mitigated easily if you choose to go that route. I run 1.5" and they're perfecto... Much cheaper too.

I run these in 4x8 tents. Zero leaks. I can also unthread the nut thats on the inside of each bucket and remove the connecting pipe between each for cleaning purposes.