Ok so some of my plants are wilting but still green but with purple stems and some of my plants are turning from green to a pretty good yellow. The roots when i pull them up are not the bright white like i know they should be but more of an off white color, getting closer to root rot. The plants are young so there is minimal root growth, i picked up the clones from a dispensary. The plants have gotten worse and look terrible.
My ph i have kept between 5.5 to 6.2
My ppms sit at about 550 to 650
My water temp raises immediately after i put in new water and it gets up to 28 to 30 degrees Celsius, which is about 82 to 85 f. I know this is too high but im just trying to figure if this is the problem.
Also my ms measurement is about 1200 to 1300 not sure what that stands for but it is on my hanna tester that i got from the hydro store. What should it be at?
A diagnosis would be great.
Also, I have 2 600 watt lights running above my two 20 site aero systems. I have use the system before and the water temp did not raise this much. How do i control the water temps moving up this high?
Any advice would be great, thanks.
My ph i have kept between 5.5 to 6.2
My ppms sit at about 550 to 650
My water temp raises immediately after i put in new water and it gets up to 28 to 30 degrees Celsius, which is about 82 to 85 f. I know this is too high but im just trying to figure if this is the problem.
Also my ms measurement is about 1200 to 1300 not sure what that stands for but it is on my hanna tester that i got from the hydro store. What should it be at?
A diagnosis would be great.
Also, I have 2 600 watt lights running above my two 20 site aero systems. I have use the system before and the water temp did not raise this much. How do i control the water temps moving up this high?
Any advice would be great, thanks.