BHO with Vacuum oil/wax tutorial

highly doubt it. with the mixing that occurs when blasting, its almost impossible.

there might be differences of a fraction of a percentage, but nothing significant id guess.

I know that happens when I mix 2 oils... or make a vial and put 2 kinds of oils in there, and its not fully mixed. but different tastes/potencies from the same blast, unless tried to get that effect, would be very tough IMO.

whats the dude trying to get from you? just trade a .2 for his .2 and see if it is harsh...

not to get too side tracked but i want to have a setup similar to this someday...https://www.rollitup.org/hydroponics-aeroponics/149998-heaths-flooded-tube-vertical-5.html

yields 46oz from one 600w

The rest of the LCOG that's finished hanging how going to jars. A lot of the smaller stuff will go to concentrates. Can't wait to finally weigh and get a total yield.

So may be a newb question but was dabbin with a buddy and he had some club wax and after a dab left a black puffed up crust on the nail what the fuck is that never had it happen before

happens to mine over time, not 1 hoot though. coulda been many things. chunks of weed/dust in the oil. plant waxes. or maybe your hoot was just too big and the nail wasnt hot enough? hard to say. maybe it had kief mixed into it, thinking it would boost it up?

when you say wax, it makes me think it was more of a solid piece than it was a liquid.. ive found that those solids produce more shit on my nail than the liquid oils.

What VP said. Was your wax winterized to remove the plant waxes, before turning into a "Wax?"

Fadedawg said:

What VP said. Was your wax winterized to remove the plant waxes, before turning into a "Wax?"

Click to expand...

No it was not I have ethanol on way

And not shure about how it was made etc it was a gram from the club he had

20.5 grams...kinda forgot about it hanging and it's pretty much dry enough to smoke. total off that plant was 104.5grams. mainly under a 150w but had a little help from a 400w and my Kessil led.
Very pungent aroma when 'broken apart, i swear i haven't smelt anything like this LostCoastOG every before...i know it's crossed with chemdog #4 and for some damn reason my mind is stuck on that's why it has this distinct odor/flavor i've not had before the LCOG.

It's almost stings the nose a big when broken open...in a good way lol

So in the second pic, the bottom pile and half of the second pile(6.5grams total) is going to QWET, so is 3grams of BD. I'm mixin them together and it should come out with a very nice overall high.

Hope to perform the wash tonight.

[video=youtube_share;FcdOtw8sglI]http://youtu.be/FcdOtw8sglI[/video]

So i think this sill work out pretty dang good. I was in a rush at Ace and didn't have time to figure out a quick/easy way to attach the clear tube to the garden hose. There are those male garden hose end replacements that slide into the hose and can be clamped down...maybe that'll fit in the tube and i can then simply screw the garden hose on.

Didn't get around to performing a QWET tonight and my last winterizing didn't get filtered enough and needs to be rewinterized. so i'll have a couple different runs to distill offffffff.
View attachment 2646029View attachment 2646030View attachment 2646031very gooey, accidentally got to around 150F for some time...lol well first time that's happened to me and never had any consistency like this before but i'm going to re filter it because it looks all grainy when played with then it smooths out after it sits.
View attachment 2646032View attachment 2646033mason jar like all ready to go....still shredded this lid trying to go from 1/4"-3/8", thanks for the warning Fade lol. Didn't shred it too bad thought and with two seals smashed down pretty tight i think i'll be good. Guess it'll have to wait till tomorrow night. Harvesting that scraggly LCOG tonight, i've mentioned a time or two...really want to have that distiller up and running good because i'm making a lot of QWET from this harvest.

[video=youtube_share;3qv6IFgV9Mc]http://youtu.be/3qv6IFgV9Mc[/video]

Fadedawg said:

No need to purge the remaining butane before winterization, as removing the alcohol will remove the residual butane.

Click to expand...

Sorry for the ultra late response, but here goes. I plan on making only "shatter" (all bho runs winterized). Is there any purpose to me getting a vac pump setup other than speed?

debaserrrrr said:

Sorry for the ultra late response, but here goes. I plan on making only "shatter" (all bho runs winterized). Is there any purpose to me getting a vac pump setup other than speed?

Click to expand...

Yes, a quick thin film vacuum purge uses less heat and leaves behind more of the floral flavored monoterpenes, so that the oil smells and tastes like what it was extracted from.

Thanks!

This thread makes me want a condenser and vac badly.

For now I think I will be purging my winterized everclear / bho mix in front of a fan and heated by something (need to grab a heat pad or similar). In the past I have double boiled / water bathed down to very little then no heat air blasted it for a long time.

650baquet said:

View attachment 2644634The rest of the LCOG that's .

Click to expand...

sweeet looking frosty ness mang. i wanna smell that beezy

650baquet said:

not to get too side tracked but i want to have a setup similar to this someday...https://www.rollitup.org/hydroponics-aeroponics/149998-heaths-flooded-tube-vertical-5.html

yields 46oz from one 600w

Click to expand...

speaking about vertical.. check this guy out !
https://www.rollitup.org/grow-journals/597139-whodat-back.html#post8364346

method2mymadness said:

What would u recommend guys for winterizing

Click to expand...

which alcohol did you purchase?

i feel like my everclear is now giving my hash an everclear like taste.. wth..
but! ive made winter waaaaaax. yeee, im just a big wasteful person though, i dont recover anythingggggg.



loving the love in the thread!

wadduppp debaserrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr, lets seee some trials and erorffffrs!

I should be blasting about 16g of trim tomorrow. I will come back with some pics soon.

What does the winterized wax look like? I don't recall seeing any before.

this is what perfection looks like :]
first pic shows the weight of the waxes and other shit that dont get ya high. i tared a new filter, then weighed the used filter.

and this run was a re run of my santa cruz blues.

NOTE TO EVERYONE , if you are using a bigggg tube, dont pack that shit tight.. i keep clogging up my damn pulls.

out of 5 oz in, i got 19 grams out total with rerun.. 13.5% return, blowsssssssssssssssssssssssssssss. return percentage sucks ass,

butttt the product kicks ass..






soo, i guesss imma be winterizing alllll my shiet now, yey for scraping!

notes on this run:

sprayed in to pyrex, boiled of butane till it was a runny film
poured 10x amount of (from freezer)ethanol into oil in pyrex while oil was still in liquid form, (not stable or bubbly)
stirred up with tool, shook around, covered with plastic food wrap ad placed into freezer.
stirred a couple times while in freezer for 48 hrs.
after freezer, took out and strained through one coffee filter into a glass cup
put that back into freezer while straining.
wiped clean pyrex dish, then poured the glass cup back into the pyrex.
placed pyrex onto heating pad, heating pad surface was at about 140F, i also placed a fan blowing directly over oil. let that sit for about one hour,
came back to pools of oil in my pyrex, (oil was about 110-120F after ethanol boiled off)
scraped that up, (difficult) and scooped onto parchment.
placed parchment into vac (no heat) did the vacuuming process till i achieved my foam muffin.
after muffin, melted down at about 140F, once a puddle, lowered heat to 120F and put to full vac.
24 hrrs later, waxxxxxxxxxx.



Here was my first run of the scb
no ethanol wash, just straight butane wax.
last time i ran this, my finishing heat was 140F+!!!!
sooo, i figured it would be similar this time around. but i was royally fucken wrong!
i set this thing at 135F full vac, and about 6 hours later, half of it was waxing, so i thought i was on the right track,..

well, i got to work, and come back, and i have a nice gold gooed for life patty..
watch out with your heat guys!

very nice. havnt seen winterized wax yet!!!