Best method out of three, to make vape juice?

A

antonsalazar

New Member
I am reaserching best method to make vape juice, and right now im thinking about three methods.
1. Pressing rosin then mixing it with product like waxliquidiser.com
This juice would be a bit too concentrated, what can i mix it with, to thin it more, would VG, PG be a good option? Terpenes is a bit too expensive.
Do i need to decarb pressed wax, or does it come out decarbed?
2. Infusing by boiling buds in PG.
I allso read that MCT oil or PEG400 are better, but then, do i mix MCT with PG or is it ready as is to vape, as only infused MCT?
3. Extract oil, using RSO method, then mix it with liquidiser, or just mix it with PG or or MTC.
Which method would be the best? Nr 2 seems to be most simple, and cheap but does it extract THC efficiantly, or am i wasting the flower?
Do i win anything by extracting concentrate first by RSO method or pressing wax, and then turning it in to a vape, since it adds extra step and extra cost.
Maybe there is some method that i dont know about, that is even better? I do want to make juice out of buds, cant buy ready made cincentrate tho.
Well thats a lot of questions, hopefully someone can help me out with at least some of them :)
 

Homemade oil for my vape pen

I have a hard time finding the oil cartridges for my vape pen so id like to make some of my own if its not too much of a hassle. What is the procedure that I want to look up to learn how to do this? I've only tried a couple different brands of oils, I forget the name of the one with a button on...
www.rollitup.org
 
My favourite

Blast and make BHO

purge

add equal amounts of C8MCT oil into the BHO and mix.

syringe them up and add to your carts.

that’s how I make it.
 
Another alternative is

QWISO

then mix with C8MCT

I’ve used both PG (harsh) and PEG400 (plastic tasting) and I’ve found C8 MCT to be best
 
jondamon said:
Another alternative is

QWISO

then mix with C8MCT

I’ve used both PG (harsh) and PEG400 (plastic tasting) and I’ve found C8 MCT to be best
Click to expand...
You are totally correct
Are use both fresh Rozen and ethanol washes from a Vape juice and you can tell little difference between the flavors but some people like the Vape parts from just Rozen best
 
I was asking for advice on this stuff, but was met with fear and hostility where I asked.

I was planning on making some juice by
  1. decarbing buds
  2. freezing them and 95% alcohol by volume (or 190 proof) grain alcohol, in this case a polish equivalent of alcohol for about 3-4 hours (in my personal upright food fridge) BEFORE combining them
  3. combining the 95% ethyl alcohol and decarbed nugs, shaking for about 15 - seconds and returning to the freezer
  4. shaking a few times a day over 10 days
  5. straining the mixture of plant matter
  6. purging the alcohol out, either without heat or under 70°C in a water bath to keep any good stuff
  7. combing the resulting goop with some vape juice mixture
I'm not certain on what liquid I will use to make the vape juice at the end, as I don't much care for PG, know pretty much nothing about MCT (of any form) except that people tell me not to vape fats, but I am having trouble finding any reputable research done on these topics.
Is there a reason people haven't mentioned Vegetable Glycerine in this thread? That was probably what I was going to use.

Does anyone have any tips or recommendations for my planned method?
 
Last edited:
terryflap said:
I was asking for advice on this stuff, but was met with fear and hostility where I asked.

I was planning on making some juice by
  1. decarbing buds
  2. freezing them and 95% alcohol by volume (or 190 proof) grain alcohol, in this case a polish equivalent of alcohol for about 3-4 hours (in my personal upright food fridge) BEFORE combining them
  3. combining the 95% ethyl alcohol and decarbed nugs, shaking for about 15 - seconds and returning to the freezer
  4. shaking a few times a day over 10 days
  5. straining the mixture of plant matter
  6. purging the alcohol out, either without heat or under 70°C in a water bath to keep any good stuff
  7. combing the resulting goop with some vape juice mixture
I'm not certain on what liquid I will use to make the vape juice at the end, as I don't much care for PG, know pretty much nothing about MCT (of any form) except that people tell me not to vape fats, but I am having trouble finding any reputable research done on these topics.
Is there a reason people haven't mentioned Vegetable Glycerine in this thread? That was probably what I was going to use.

Does anyone have any tips or recommendations for my planned method?
Click to expand...
Buddy it will taste like shit, the whole ten day thing is a no go. I’ll find a link to an old thread..... it works well for personal use
 
Go go n chill said:
Buddy it will taste like shit, the whole ten day thing is a no go. I’ll find a link to an old thread..... it works well for personal use
Click to expand...
I was reading a thread regarding dry ice and I thought it would be hard to get, but not the case at all; I can get it local. After more reading on the dry ice QWET method, I think this will be the best go.

I would love to use a vacuum method to purge the alcohol, but it's got not something I can justify at the moment. Should I be concerned about left-overs in the final product?
 
terryflap said:
I was reading a thread regarding dry ice and I thought it would be hard to get, but not the case at all; I can get it local. After more reading on the dry ice QWET method, I think this will be the best go.

I would love to use a vacuum method to purge the alcohol, but it's got not something I can justify at the moment. Should I be concerned about left-overs in the final product?
Click to expand...
No, let it evaporate off. For personal use it is definitely acceptable.
 
======= in this case a polish equivalent of alcohol ====== just be carefull thers no crap in it, they offten add stuff thatsnot on label so everclear or buy some alcohol 100% garanteed pure from ebay or some such site
 
I use everclear. Here is the link to the homemade vape juice. In this thread it really doesn’t discuss distillate to much. It’s mostly for the peeps sitting at their kitchen table.... ya know what I’m saying?

Homemade oil for my vape pen

What do you mean weak? Oh you mean simmering in the blend! Ya it your right it would not be potent. I could just use them in the QWET process, then evaporate off the everclear. But first I’m cutting open the pucks to scrape out what is visible
www.rollitup.org
 
terryflap said:
I was reading a thread regarding dry ice and I thought it would be hard to get, but not the case at all; I can get it local. After more reading on the dry ice QWET method, I think this will be the best go.

I would love to use a vacuum method to purge the alcohol, but it's got not something I can justify at the moment. Should I be concerned about left-overs in the final product?
Click to expand...
Leaving your plant material in everclear for days is a bad idea, it will come out like Tar. You need a quick wash with everclear
 
C8
And true ccell carts. .5ml
The winterization part can still be sketchy, mine has almost always turned dark as I use them. The .5 ml carts help by not contaminating a lot of the product.
mom definitely not a scientist but the link will help and answer many questions and stop you from making mistakes. Tinctures and vape juice are not the same
 
Go go n chill said:
C8
And true ccell carts. .5ml
The winterization part can still be sketchy, mine has almost always turned dark as I use them. The .5 ml carts help by not contaminating a lot of the product.
mom definitely not a scientist but the link will help and answer many questions and stop you from making mistakes. Tinctures and vape juice are not the same
Click to expand...
I don't think it turning dark really matters because it happens with regular ejuice. I was going to use it in a bigger atomizer and dilute the concentrate a fair bit. Since I already have a box mod that supports Temperature Control and a decent tank.

The general plan I have now is yeah, skip the decarb, dry ice quick wash in ethanol, evaporate out at room temperature, combine with c8 mct at a low temperatare as described in some guides I've come across on another site. (not sure if links to other sites are allowed.)
 
Last edited:
Just to add VG will cause separation unless you Invest in machines to mix it.

C8 MCT has been used for a while now.

I agree 0.5ml carts are best as without any winterising your mix turns dark due to heat and cool down.
 
jondamon said:
Just to add VG will cause separation unless you Invest in machines to mix it.

C8 MCT has been used for a while now.

I agree 0.5ml carts are best as without any winterising your mix turns dark due to heat and cool down.
Click to expand...
Sweet as, C8 MCT it is!
Is the heat turning dark really that big of a deal though? Does it affect the potency?
 
Read the thread I posted bro. Follow the lead members on there and ignore what we say ignore. We’ve tried to keep it clear of stuff that doesn’t work.
 
You must log in or register to reply here.

Similar threads

D
making vape carts at home
Replies
11
Views
2K
waterproof808
W
DeadHeadX
Using kief to make oil, a few questions
Replies
10
Views
3K
Paddletail
Paddletail
SSP
Long time toker but first real medical extraction, need some help please
Replies
15
Views
1K
Fadedawg
Fadedawg
Ta-dah
Do I need a new extraction method?
Replies
17
Views
2K
go go kid
go go kid
Richard Drysift
Dick’s super heady cosmic brownie bites
Replies
3
Views
713
LeastExpectedGrower
LeastExpectedGrower
Back
Top