BeachWolf47
Member
Hi all -
I bought some Autoflower Feminized seeds from Attitude
Lowriders Auto Hindu Kush and Buddha Red Dwarf.
I germinated them in Jiffy 7 pucks with tap water.
After breaking the surface, I had the seedlings on a single T5 fluoro 20/4.
5/6 germinated within 3 days. The hold out was a Hindu kush seed. I took a look, and it seemed to have cracked but that's where the magic ended.
On day 6, I transferred the jiffy pucks as follows:
HK-2 and RD-2 went into Hempy 16oz styrofoam cups.
HK-2, RD-1, and RD-3 went into FoxFarm soild in 16oz cups.
For the transfer I used tap water that had been oxygenated with an air stone for ~6hrs, and I used the following nutes/gallon.
cloning solution 250ul super thrive vit 250ul GH floraNectar
500ul
Hempy is the following: 75% perlite/25% vermiculite. And yes, I just bogged the jiffy puck down into it.
It's been 24+ hrs since the change to 16oz cups, and they all seem ok.
I have been setting up the grow tent, and testing it out for their move into it.
grow area-
I think I'm a step above ghetto...but barely.
I bought a grow tent off fleabay. 20x36x64 --> this would fit in the spare bedroom closet. I've never done this before, but I think cheap grow tents = cheap.
I have the following:
4" in-line duct fan for intake.
6" in-line duct fan for exhaust
150 watt HPS
1 small fan.
2 humidity/temp gauges.
1 manual 24hr timer for the light.
I also ordered the following for controlling humidity:eva-dry dehumidifier
zoo med hygrotherm
I plan to use the Lucas formula for nutes on both the hempy and soil grows. I am going to use FloraNova Bloom.
Another thing....I'd like to stick a couple of these guys on the porch. We'll see.
I welcome any comments. And if you have grown these strains, please feel free to show me your pictures and any knowledge you have about them
BeachWolf.
I bought some Autoflower Feminized seeds from Attitude
Lowriders Auto Hindu Kush and Buddha Red Dwarf.
I germinated them in Jiffy 7 pucks with tap water.
After breaking the surface, I had the seedlings on a single T5 fluoro 20/4.
5/6 germinated within 3 days. The hold out was a Hindu kush seed. I took a look, and it seemed to have cracked but that's where the magic ended.
On day 6, I transferred the jiffy pucks as follows:
HK-2 and RD-2 went into Hempy 16oz styrofoam cups.
HK-2, RD-1, and RD-3 went into FoxFarm soild in 16oz cups.
For the transfer I used tap water that had been oxygenated with an air stone for ~6hrs, and I used the following nutes/gallon.
cloning solution 250ul super thrive vit 250ul GH floraNectar
500ul
Hempy is the following: 75% perlite/25% vermiculite. And yes, I just bogged the jiffy puck down into it.
It's been 24+ hrs since the change to 16oz cups, and they all seem ok.
I have been setting up the grow tent, and testing it out for their move into it.
grow area-
I think I'm a step above ghetto...but barely.
I bought a grow tent off fleabay. 20x36x64 --> this would fit in the spare bedroom closet. I've never done this before, but I think cheap grow tents = cheap.
I have the following:
4" in-line duct fan for intake.
6" in-line duct fan for exhaust
150 watt HPS
1 small fan.
2 humidity/temp gauges.
1 manual 24hr timer for the light.
I also ordered the following for controlling humidity:eva-dry dehumidifier
zoo med hygrotherm
I plan to use the Lucas formula for nutes on both the hempy and soil grows. I am going to use FloraNova Bloom.
Another thing....I'd like to stick a couple of these guys on the porch. We'll see.
I welcome any comments. And if you have grown these strains, please feel free to show me your pictures and any knowledge you have about them
BeachWolf.
Attachments
-
99.1 KB Views: 27
-
94.6 KB Views: 33
-
95.2 KB Views: 41
-
81.9 KB Views: 37
-
49.8 KB Views: 49
-
33.7 KB Views: 39
-
78.9 KB Views: 37
-
91.7 KB Views: 35
-
90.7 KB Views: 60