Any ideas? Closing a room in.

Dr Lg

Active Member
The room I am currently using is too big for the total space of my grow and I want to make it so I can cut off most of the room from the grow and have mylar on all sides to maximize light. I pretty much want to make a wall to seperate the grow from the rest of the room without using 2 by 4's and drywall. And I want to be able to attach mylar to the "wall" I create.

Any ideas???
 
I would look into getting a grow tent. They are completely sealable and have reflective material on all interior sides.
 
Tent or lots of poly and duct tape. If you use white poly then you wont need mylar.
 
4hydro.com sells stuff called panda film. one side is white and one side is black and its cheap and thick. it only reflects 90 percent of light in the white side but i would build a wall out of 2x4's and just attach the panda film or mylar to the studs with a staple gun. i wouldnt bother with the drywall. they also sell zippers that can attach to the panda film so you could frame in the area you want to use and then cover it with panda film and add the zipper and you would have a big home made grow tent.
 
What is the current size of the room and what do you want to cut it down to? What kind of lights are you running and what are the currents temps in there?
 
4hydro.com sells stuff called panda film. one side is white and one side is black and its cheap and thick. it only reflects 90 percent of light in the white side but i would build a wall out of 2x4's and just attach the panda film or mylar to the studs with a staple gun. i wouldnt bother with the drywall. they also sell zippers that can attach to the panda film so you could frame in the area you want to use and then cover it with panda film and add the zipper and you would have a big home made grow tent.

Panda film works great, that is a cheap alternative to building a wall
 
Back
Top