Aero Cloner h202?

I have some 35% h202 and was wondering if its ok to use in my ez cloner in the water with the clones. I've been using tap water at 74 degrees, 75 ppm, 5.8 ph, 80% rh and h202 at 2.5 ml per gallon every 3 days. I am currently getting soft stems and have had to remove half the clones. I lost the last batch and ran h202 through it for 24 hours to clean before the second batch. The plant I cloned from has root rot, maybe that's the issue? Thanks.

H202 hasn't prevented mushing. Gonna try the pump on 15/30.

you might want to consider getting a cycle timer, can be had on ebay for about $27. Try 1 min on 5 min off. That should solve your problem.

I actually increased the time to 15/45. If it doesn't work I'll get a cycle timer. Thanks for the advice.

I'm wondering if it has anything to do with the mothers being grown hydroponically. The plants grow so fast that the clones I pull are very soft. Perhaps thats why their mushing out so quickly. I've never grown in soil, and I've never cloned before. Perhaps the cycle timer is actually necessary. The instructions on the ez clone say to run it 24/7 and others swear by 24/7 as well. Some also use cycle timers.1/4, 1/5, 15/15, 15/30, etc.Maybe the ones with cycle timers are cloning from a softer mother than those who run it 24/7. Or I could be completely wrong. I'll get this figured out eventually.

10 days in the ez cloner and a few are starting to show roots 2 days after switching to 15/45. The clones don't seem to be mushing out like the others.
Thinking I might start a new batch on 15/45 to see if any mush out at all.