I’m not using the controller, just the humidifier with the probe measuring temps and rh. Do you know how to program the t3 without a controller? I tried setting it to 80% humidity, bout to check on the tent
The front of the humidifier is the controller if you have no separate controller. Just read the instruction manual.
Think he did I found it confusing.
I read it, but it isn’t really making sense to me. It says I can set it according to vpd, so far I have it on 80rh but for some reason my thermometers are only reading 70rh
Yes it really is confusing, could you send me a link to the controller you’re talking about? Thank you
Thanks. I have the exhaust on 24/7 and I think that’s the reason why the rh is not going over 70
There are three, The Controller Pro Plus has 8 connections, the Controller Pro has 4 both have wireless connectivity. Controller 69 just has bluetooth.
If you have the controller all your next purchases should be able to be controlled. having the vent fan running on low speed is normal, but you have it ramp up in speed when humidity or temp gets to high.
thanks yall. Ended up figuring out the vpd programming, at least I think I did. The rh in my tent has been in accordance with vpd. Gotta figure out what to do about the closet though, might be a bit too big for the small humidifier maybe
That will play a part. Another reason to get the controller.
I keep my humidifier outside of the tent. One of the issues I had when a unit was in the tent bumping the front changes setting. Was chasing my tail as to why it kept changing, part of it was the manufacturer of the unit. But I changed to AC Infinity humidifier and the controls are disabled on front when it is under controller control. So my humidity has been constant and no issue.
Guys, I found out how to control the humidity with the controller on the device. It just seems to read a bit more humidity than my thermometers. Now, I’m thinking of flowering these. Are these big enough to fill my tent ? Thanks yall.
Depends, What's the flower footprint of that light.
I believe it’s 3x3. It’s an hlg 260, the tent is 2x3x6
Then, if it were me, I'd top and lst, to fill the canopy first.
Thank you, I really want to just get to flowering them soon, I have 2 others the same size and was thinking maybe if I threw them in here it could sorta be a “sog”.
Yo man, they're your plants. You can do what you want. Id only go with 2 plants in that tent though.
