Ac Infinity Humidifier

Avering

Active Member
After returning the last one I bought, I ended up ordering two yesterday, as I wanted to match my temp and rh to vpd charts. Does anyone have experience with programming these?if so, could you help me out? I read the manual and can’t seem to figure it out. Thank you
 
Last edited:

Avering

Active Member
Yes if you are connected to one of the controllers
I’m not using the controller, just the humidifier with the probe measuring temps and rh. Do you know how to program the t3 without a controller? I tried setting it to 80% humidity, bout to check on the tent
 

UnknownRemedy

Well-Known Member
I’m not using the controller, just the humidifier with the probe measuring temps and rh. Do you know how to program the t3 without a controller? I tried setting it to 80% humidity, bout to check on the tent
The front of the humidifier is the controller if you have no separate controller. Just read the instruction manual.
 

Avering

Active Member
The front of the humidifier is the controller if you have no separate controller. Just read the instruction manual.
I read it, but it isn’t really making sense to me. It says I can set it according to vpd, so far I have it on 80rh but for some reason my thermometers are only reading 70rh
 

formularacer

Well-Known Member
Yes it really is confusing, could you send me a link to the controller you’re talking about? Thank you

There are three, The Controller Pro Plus has 8 connections, the Controller Pro has 4 both have wireless connectivity. Controller 69 just has bluetooth.
 

Avering

Active Member

There are three, The Controller Pro Plus has 8 connections, the Controller Pro has 4 both have wireless connectivity. Controller 69 just has bluetooth.
Thanks. I have the exhaust on 24/7 and I think that’s the reason why the rh is not going over 70
 

formularacer

Well-Known Member
Thanks. I have the exhaust on 24/7 and I think that’s the reason why the rh is not going over 70
If you have the controller all your next purchases should be able to be controlled. having the vent fan running on low speed is normal, but you have it ramp up in speed when humidity or temp gets to high.
There is a lot of functionality with the controller there is not much you can't manage with a little thought. From controlling lights to watering systems.

But the ability to monitor my grow while at a medical appointment is priceless......
 

Delps8

Well-Known Member
I would encourage you to call AC Infinity tech support. They have the product knowledge and training in helping people understand how to use their products and will be able to walk you through the set up while you're on the phone.
 
Last edited:

Avering

Active Member
If you have the controller all your next purchases should be able to be controlled. having the vent fan running on low speed is normal, but you have it ramp up in speed when humidity or temp gets to high.
There is a lot of functionality with the controller there is not much you can't manage with a little thought. From controlling lights to watering systems.

But the ability to monitor my grow while at a medical appointment is priceless......
I would encourage you to call AC Infinity tech support. They have the product knowledge and training in helping people understand how to use their products and will be able to walk you through the set up while you're on the phone.
thanks yall. Ended up figuring out the vpd programming, at least I think I did. The rh in my tent has been in accordance with vpd. Gotta figure out what to do about the closet though, might be a bit too big for the small humidifier maybe
 

formularacer

Well-Known Member
thanks yall. Ended up figuring out the vpd programming, at least I think I did. The rh in my tent has been in accordance with vpd. Gotta figure out what to do about the closet though, might be a bit too big for the small humidifier maybe
I keep my humidifier outside of the tent. One of the issues I had when a unit was in the tent bumping the front changes setting. Was chasing my tail as to why it kept changing, part of it was the manufacturer of the unit. But I changed to AC Infinity humidifier and the controls are disabled on front when it is under controller control. So my humidity has been constant and no issue.
 

Avering

Active Member
The front of the humidifier is the controller if you have no separate controller. Just read the instruction manual.
I would encourage you to call AC Infinity tech support. They have the product knowledge and training in helping people understand how to use their products and will be able to walk you through the set up while you're on the phone.
I keep my humidifier outside of the tent. One of the issues I had when a unit was in the tent bumping the front changes setting. Was chasing my tail as to why it kept changing, part of it was the manufacturer of the unit. But I changed to AC Infinity humidifier and the controls are disabled on front when it is under controller control. So my humidity has been constant and no issue.
That will play a part. Another reason to get the controller.
Guys, I found out how to control the humidity with the controller on the device. It just seems to read a bit more humidity than my thermometers. Now, I’m thinking of flowering these. Are these big enough to fill my tent ? Thanks yall.
 

Attachments

Hollatchaboy

Well-Known Member
Guys, I found out how to control the humidity with the controller on the device. It just seems to read a bit more humidity than my thermometers. Now, I’m thinking of flowering these. Are these big enough to fill my tent ? Thanks yall.
Depends, What's the flower footprint of that light.
 
Top