AC infinity controller.

B

BlueDream305

Member
How do you properly use AC infinity exhaust fan and inline fans?
currently i am running a 48x24x72 AC infinity grow.
I have an AC infinity T6 located inside the tent exhausting from the top and out of a window to the outside.
I have an AC infinity T4 inline fan blowing air from the bottom into the tent (fan is on top of the tent)
I operate both units together into the AC infinity controller on the setting of 5.
i also have additional air flow via 2 desktop fans one is on the ground blowing under the canopy the other is mounted to the tent blowing through the canopy.

With it running 24/7 i cant get my humidity to stay passed 38% even with a Vivosun 6L humidifier running, once i turn off my exhaust the temperature increases from around 68F to 73F and humidity rises to the 50% range. (Where its ideal)
when lights go out my humidity raises to 70% and temp drops to 55F!

can someone please explain the controller custom high/low settings?
Should the exhaust and inline be on all of the time?
has anyone had any problems with major swings using this equipment?

thanks :)
 

Attachments

Last edited:
1

1212ham

Well-Known Member
BlueDream305 said:
How do you properly use AC infinity exhaust fan and inline fans?
currently i am running a 48x24x72 AC infinity grow.
I have an AC infinity T6 located inside the tent exhausting from the top and out of a window to the outside.
I have an AC infinity T4 inline fan blowing air from the bottom into the tent (fan is on top of the tent)
I operate both units together into the AC infinity controller on the setting of 5.
i also have additional air flow via 2 desktop fans one is on the ground blowing under the canopy the other is mounted to the tent blowing through the canopy.

With it running 24/7 i cant get my humidity to stay passed 38% even with a Vivosun 6L humidifier running, once i turn off my exhaust the temperature increases from around 68F to 73F and humidity rises to the 50% range. (Where its ideal)
when lights go out my humidity raises to 70% and temp drops to 55F!

can someone please explain the controller custom high/low settings?
Should the exhaust and inline be on all of the time?
has anyone had any problems with major swings using this equipment?

thanks :)
Click to expand...
It can't control anything if set to a constant speed 24/7. Set it to auto mode and set temp/humidity limits.

Ventilation fans don't need to run all the time, some will disagree. 68F-73F is far from ideal, go for the low 80's. LED doesn't raise leaf temp above air temp with infrared like HID does.
 
Goodshit97

Goodshit97

Well-Known Member
I run a 36x36x72 ac infinity with t6 infinity. Currently i have the controller 67 with bluetooth. I set my temp to 82, humidity during veg at 55 and set fan speed at 6 then run it on auto.

The fan will go qbove 6 if the tent goes above your alarm settings.

Ive found running on auto makes thing so much less of a hassle.
 
Goodshit97

Goodshit97

Well-Known Member
Also ive found with my 4 inch inline running in the winter, i cant stay above 74 so i just shut it off and only run it in the warmer months. Just my 2cents
 
B

Bookush34

Well-Known Member
My AC infinity controller.
I set my high temp and high humidity
Fan comes on only when it reaches either one of those values.

in my environment the fan cycles on temperature. It’s a struggle to get humidity high.

as long as your fan is cycling at least a few times a hour. Your good. Lots of air exchanges
 
You must log in or register to reply here.
Top