A Medicinal Refrigerator

Danielsgb

Danielsgb

Well-Known Member
Zane Xander said:
Looking Good, Run them wires inside the pipe until you get outside the frig.

Dan I am building a frig too; I need butt plates for my fans, I saw where you macgyver a drain cap you picked up next to the sewer pipe items.
I may have to enginer some too, I have installed the fans in wall- flush. well one fan so far. These 4'' radio shack 12v Fans are like almost 5 in sq. (4.75 inches). Yeah I need a way of attaching the 4'' pipe to the fan from the inside. Ya know.. Any other Idea's on how to rigg up a butt plate to the fans?
Click to expand...
I didn't want the wires to the outside, because sockets are hard to mount when is in, plus feeding them before exhaust fans would be hard too. The 5"sq. go to 4" PVC, so you can modify any 4" PVC. Like how I jig-sawed the threads off for this Intake. Hope that helps. Keep us updated.

gumball said:
you can make one, i did. here is a thread i did https://www.rollitup.org/grow-room-design-setup/339640-do-yourself-ducting-flange.html. it takes about close to an hour to make. but as we have all found, our special hobby requires some custom parts. i have found i could customize everything i need. whether i do it or not depends on if it is faster, easier, or cheaper made by someone else. good luck buddy.

hey daniels, that stuff is looking good. here is an idea on the heat lamp/green light. get a Y light socket splitter. get a photocell light sensor socket, and a green light. put the heat lamp straight into the Y light splitter, then the green light into the photocell socket, and into the Y splitter. once the lights go out, the green light will come on. i dont think the green light will be enough, or directed towards the photocell enough to prevent it from coming on.
Click to expand...
I don't want the light on at all dark times. The green cfl's are painted green and leak too much. The heat socket will be on a separate timer, so it would be dead then anyway if it does work out. from this pic you can see fitting it would be hard and drop the heat bulb too much.
Daniels:mrgreen:
Tubes in 009.jpg
 
gumball

gumball

Well-Known Member
Daniels, I have been meaning to ask you since you have MH, HPS, & CMH. I have CMH now, and plan on doing a flower cab bigger than my PC. What light would you use for the flower cab if your veg cab had a 4000k color CMH? I am thinking 150 HPS, or 150 CMH but 3000k instead of 4000k color even though it doesn't have the same spectrum. Any thoughts from you?
 
Danielsgb

Danielsgb

Well-Known Member
gumball said:
Daniels, I have been meaning to ask you since you have MH, HPS, & CMH. I have CMH now, and plan on doing a flower cab bigger than my PC. What light would you use for the flower cab if your veg cab had a 4000k color CMH? I am thinking 150 HPS, or 150 CMH but 3000k instead of 4000k color even though it doesn't have the same spectrum. Any thoughts from you?
Click to expand...
I'd add the HPS. I've read they are better for a balance. That's what I'm trying. My CMH kicks the MH's ass on my veg. table.
 
gumball

gumball

Well-Known Member
That's exactly what I was thinking. Plus I want 150watts in my flower and my CMH is only 100 watts, so I wouldn't like putting it in there to start with. I would always be able to open my pc case and place the flowering plants under the CMH from time to time for some added UV trich production. Thanks for helping re-enforce my ideas buddy!!
 
Danielsgb

Danielsgb

Well-Known Member
I called the girl about my research for being their Grower. Weak news. One of the Main $$$ guys is leaving in about a week, for a month so he wants to get started in November. The guy I meet on Friday seemed like it would be going soon. I'll just keep on research and planning. I'll have 2 harvested in 3 or 4 weeks and a Mum of both strains to start cloning already. Hopefully they are truly gonna do this and want me. If not I'll get something going small on my own.:twisted:

I got the sockets wired, but only have the Heat Lamp going. I have to go to Lowes for more wire nuts. I made a new support for the HPS reflector. I also need a 2' x 3' plywood to mount the Ballasts Boxes to the wall. I need to get it's spot in the garage, then see how far the cords to it need to be. I'm on to wiring. I may have to get the lower W Heat Bulb, but no fans are going yet either. I got the area around the lower intake Duct Taped then Foil Taped. It can be wiped down easily now. I have to get the tube for that bottom drain too.
Daniels:blsmoke:
Heat Lamp On 002.jpgHeat Lamp On w Flash.jpgHeat Lamp On Best.jpg
 
gumball

gumball

Well-Known Member
glad to see everything going well. whats your projected maiden voyage? i am thinking she'll be ready by mid Oct, prob to start a halloween grow. that would be spooktacular!!! :)

yeah, i know, i am a cheesy fellow, oh well!!
 
Danielsgb

Danielsgb

Well-Known Member
reggaerican said:
your fridge is comming along nicely man cant wait for more
Click to expand...
Thanks. Follow along, now is when these get fun.:mrgreen: Wiring up bulbs and fans is way better than cutting tin.:twisted:

gumball said:
glad to see everything going well. whats your projected maiden voyage? i am thinking she'll be ready by mid Oct, prob to start a halloween grow. that would be spooktacular!!! :)

yeah, i know, i am a cheesy fellow, oh well!!
Click to expand...
:roll:Good one:roll: Thinking less than two weeks before testing starts. Maybe Marge might finish a few weeks in this while one starts it's flowering in the fridge. Maybe a Yule Cola, so right back at ya on the cheesy.

crazytrain14 said:
set up is coming along man. do you plan to leave the walls white or use some sort or reflective stuff?
Click to expand...
I'm just leaving it white. 500W plus a 100W Heat Bulb (maybe less) should do it.:blsmoke:
Daniels:eyesmoke:
 
reggaerican

reggaerican

Well-Known Member
yea daniel im an electrician so of course that was the funnest part of my setup.. i always wanted to do a stelth grow in my livving room but i been busy finishing my basement grow.. check out my link i started a cool t hread on a single cola grow (see of green)..
 
HowzerMD

HowzerMD

Well-Known Member
reggaerican said:
yea daniel im an electrician so of course that was the funnest part of my setup.. i always wanted to do a stelth grow in my livving room but i been busy finishing my basement grow.. check out my link i started a cool t hread on a single cola grow (see of green)..
Click to expand...
I came to inspect what daniels has done, and very nice progress so far. And Reggae : I checked out your SOG it looks to be fun :D. You'll do well from what I see.
 
reggaerican

reggaerican

Well-Known Member
HowzerMD said:
I came to inspect what daniels has done, and very nice progress so far. And Reggae : I checked out your SOG it looks to be fun :D. You'll do well from what I see.
Click to expand...
hey howzer thanks, i hope so.. i tried to do it once but had problems and had to abandon after 2 weeks in.. but i had other succesful natural grows..
 
HowzerMD

HowzerMD

Well-Known Member
reggaerican said:
hey howzer thanks, i hope so.. i tried to do it once but had problems and had to abandon after 2 weeks in.. but i had other succesful natural grows..
Click to expand...
Holy shnikes only 2 weeks?! You must have opened up a HUGE can of worms you couldn't fish off.
 
reggaerican

reggaerican

Well-Known Member
HowzerMD said:
Holy shnikes only 2 weeks?! You must have opened up a HUGE can of worms you couldn't fish off.
Click to expand...
not on the technical end mind you, twas an out of town job that i couldnt pass up.. at this point im the little train that could.. i think i can.... i think i can....
 
Danielsgb

Danielsgb

Well-Known Member
I got the plywood mounted to a couple studs after I got 2 screws for each Ballast/Timer Box to hang off. I put a smoke detector in-between just in case. I had to shorten the CMH's lamp cord, then use the rest to go to the freezer. I put different 240v male/female type/color so there is no confusion. I wired the cords, then put the bulbs in. I fired them both up. FUCKING bright in there.
The Hippie Gardener had a great comment.
She says "It reminds me of Griswold Christmas Vacation. He fires the lights up and blinds them".
Sis has the camera, so I'll get pics later. I'm thinking this may go quick. As far as power strips, power supply's, timers, remote thermometer leads, & fans wired You guys are gonna laugh when you see this.
Daniels:blsmoke:
 
gumball

gumball

Well-Known Member
Danielsgb said:
The Hippie Gardener had a great comment.
She says "It reminds me of Griswold Christmas Vacation. He fires the lights up and blinds them".
Daniels:blsmoke:
Click to expand...
that movie is priceless. i still cant bring myself to change it if i land on it while flipping the channels!! he f'ed with them lights and f'ed with 'em, and his wife ended up just flipping the switch!!
 
You must log in or register to reply here.
Top