9x CXB3590 3000k - First Flower Run

J

JJ43

Well-Known Member
Single plant scrog (5x5 tent), from a seed I found in a dispensary nug. This was intended to be a mother, but she got too big for the smaller tent.
The pics were taken right before chopping her down after three days in the dark.
I'll come back later with weight, but based on one jar, I'd say roughly 1.5 lb.
Donated the whole stack to science and thinking about what type of run (sog vs scrog) I'll do next time.
 

Attachments

P

PotHead3

Well-Known Member
JJ43 said:
Single plant scrog (5x5 tent), from a seed I found in a dispensary nug. This was intended to be a mother, but she got too big for the smaller tent.
The pics were taken right before chopping her down after three days in the dark.
I'll come back later with weight, but based on one jar, I'd say roughly 1.5 lb.
Donated the whole stack to science and thinking about what type of run (sog vs scrog) I'll do next time.
Click to expand...
any updates?
 
J

JJ43

Well-Known Member
PotHead3 said:
any updates?
Click to expand...
629 grams (579 of quality buds).
Not sure of the strain, but it's on the indica side. Definitely works, but I'm not done with trying to get my hands on cuts from real deal plants.
Gotta get that OG smell and feel. Nothing compares.
 
J

JJ43

Well-Known Member
PotHead3 said:
nice how many watts are you pulling with these 9 cobs? how is this setup for a 4x4 area?
Click to expand...
Pic is of kill-a-watt attached to one bar (3 cobs + 3 cpu fans) 247w.
I think 4x4 would be good. I'm planning to add another bar to my 5x5 and possibly dialing down the wattage on each bar a bit.
 

Attachments

J

JJ43

Well-Known Member
I had a bar go out of service for a couple of weeks while waiting for replacement part. Fortunately I had two area51 sgs160's as backup. (cpu fan 4 plug power bus failed)
 
P

PotHead3

Well-Known Member
nice. can you give me more info on your setup? Ive been looking for a system using 9 cobs per 4x4 area and pushing about 650watts from the cobs. what cxb 3590 do you have and how much all this cost?
 
J

JJ43

Well-Known Member
3000k cobs.
I vegged under my area51's.
Overall cost per unit, roughly $400. Honestly, I stopped maintaining my costs spreadsheet after a while.
 
P

PotHead3

Well-Known Member
JJ43 said:
3000k cobs.
I vegged under my area51's.
Overall cost per unit, roughly $400. Honestly, I stopped maintaining my costs spreadsheet after a while.
Click to expand...
? unit meaning the 9 cob led unit? you made a 9 cob cxb3590 for about $400?
 
J

JJ43

Well-Known Member
PotHead3 said:
? unit meaning the 9 cob led unit? you made a 9 cob cxb3590 for about $400?
Click to expand...
If you look at the previous pics, you can see that each bar (unit) has three cobs. I made three daisy chained bars and I will be building a fourth.
I will check receipts and recalculate the cost per unit tomorrow.
 
You must log in or register to reply here.
Top