2x50W cxb3590 enough for little plant in 60x60x140cm tent?

Rocket Soul said:

Id prprobably suggest meanwell hlg120h-54A (assuming the board is 54V, cant quite remember). A-type driver lets you dim to half power using on board dials for about 75w output. But that might ve too much for a small seedling, at least make sure you hang the light high over an immature plant as it could get fried with too much light. B-type driver would work to dim to 10% but would be able to drive the board til 2100ma as its voltage is capped at 54v.

Also, would recommend using a sheet of 2-3mm of alu as heatsink for high wattage operation.

At 2100ma you need the light about 50cm or more for a mature auto, rough calculation.

Click to expand...

Rocket Soul said:

Crests are better but dont seem necesary with this kind of board and the wattages were talking about. Also, if you find that alu sheet is not enough you can diy your crests by putting alu C-channel.

Click to expand...