coreywebster
Well-Known Member
I've got the exact same hygrometer
you say it couse the claws? those where not getting lightThere's been a few members do this and have good results.
I think I remember one guy doing a whole 5x5 .
Looks like you might have a bit of Ntox though.
What they feeding on?
yeah and the good part is you need like 8 leds good soil and a ventilator an you can get it going like me on the cheapThere's been a few members do this and have good results.
I think I remember one guy doing a whole 5x5 .
Looks like you might have a bit of Ntox though.
What they feeding on?
Not just the clawing, the one tone dark green leaves.you say it couse the claws? those where not getting light
i got a little bit of n lock up in one of them right now but nothing severe
i feed them ghe pro bloom
i started with biobizz light mix and bio grow
i was feeding them 1.5 l and bio grow + pro bloom at 1ml per liter each
i added more biogrow to the one in the left thinking it was a n deficiency
turns up is a n lock up
well no upper leaves were affected and its coming back after 1.7l of only pro bloom (2 3 4) at 1.5ml l
bless
btw they only drink spring water, unfiltered + nutes no ph measuring no nothing
Here are the last few plants I grew out using the Bloomspec sl600 which is NOT a QB board and only 85 watts. I have the complete grow documented on each plant over on GC.yeah lets see it, i was gonna purchase a qb similar to yours, but i liked so much the veg that i sticked to led bulbs, i see many people dont like it, but im fully not convinced that a 100 w board would do better than 100 watts of my bulbs,
my line of thoughts;
the bulbs have 20 leds, they are 14w therefore driving each led at 0.7w
on other hand a qb has 260 leds and 100w therefore driving each chip at 0.4w
if i put 13 bulbs i have 260 leds and 182w
see where im going?
what im saying is that i dont care if i pay 82w more if i get double the intensity / penetration per chip
the full spectrum in those 100w qb is 5 red leds 3 ir leds and 2 uv leds.. smh
so if i want to build something with greater penetration i just have to arrange my bulbs with the chips sitting close in the same fashion as a qb or a bar light but i have more watts per chip, ok im loosing efficiency doing so, because leds are more efficient if you underpower them , but i think i would have more penetration having the same count and distribution of smd leds
by the way these bulbs use the same format smd led as any qb or grow bar light (2835)
If i remember correct cfl does 0.7g/w at maxView attachment 5352533
i guess its stealth only that i dont need a filter because i dont have neigbours
any way this is week 2 and they are sitting under 336 watts of house leds 3000k 1380 lumen each some 4000k too
pots are 3 gal
any thougts?
You can buy led strips if you are a fan of diy they are extreamly efficient and you could make a vertical grow since you like the stretchmy bulbs are sitting at 98 lumens /w so i guess i would get like half the efficiency of led fixtures but i still get plenity of light this whole fixture cost me like 100 bucks and the cheapest 100w samsung qb i can get arround here is 150+shippment so.. i guess for me is worth it, plus with my fixture i can always add take and now im thinking i will add 25w uv incandecsent lamp to hit them the last 4 weeeks of flo
bless