dothedamnthing
Member
well i installed this same setup maybe 10 years ago and i thought i remembered how to.
ive ran 10/2 wire from a double pole 30 amp breaker into my t103 timer. the 2 incoming hots(white and black) go to the line side or terminals 1 and 3. The outgoing white and black, to my 1000 watt ballast are connected to the load side or terminals 2 and 4. both grounds go to the ground screw and terminal A or neutral is empty. no light? Do I have this Wrong?
I tried 2 different ballast and got nothing, so i switched one to 120v and the ballast works fine.
I put my voltage tester in the timer and i am getting power on all the terminals, but the ballast not firing.
Anyone, anything appreciated.
ive ran 10/2 wire from a double pole 30 amp breaker into my t103 timer. the 2 incoming hots(white and black) go to the line side or terminals 1 and 3. The outgoing white and black, to my 1000 watt ballast are connected to the load side or terminals 2 and 4. both grounds go to the ground screw and terminal A or neutral is empty. no light? Do I have this Wrong?
I tried 2 different ballast and got nothing, so i switched one to 120v and the ballast works fine.
I put my voltage tester in the timer and i am getting power on all the terminals, but the ballast not firing.
Anyone, anything appreciated.