guitarguy10
Well-Known Member
---
---
- Thread starter guitarguy10
- Start date
.Smoke
Well-Known Member
1/2"x 6" pvc nipple with one of these on top...
Make sure to cut the lines to the drip rings the same length.
Make sure to cut the lines to the drip rings the same length.
guitarguy10
Well-Known Member
Thank you thats the exact same pump I have but the rings are 1/2" OD. I cant go from small diameter to large like that can I? Also sorry this was the wrong subforum so i posted this question in another subforum and deleted it here as best i could so not to duplicate post.
.Smoke
Well-Known Member
You would have to adapt the hose sizes which can start to get pricey depending on how you build it. But since it's only 4 rings I'd use these...
John Guest Reducing Union - 1/2 x 1/4
The John Guest reducing union connector makes connecting OD tubing sizes quick and easy. Manufactured in gray acetal with food grade nitrile O-ring, these fittings are suitable for foodstuff and potable liquids. They are also suitable for air and inert gases therefore can be used for CO2 and...
www.freshwatersystems.com
Just have a short piece of 1/2" line on the ring, then reduce down to 1/4". (Which is standard drip feed size).
Finding a 1/2" manifold will probably be much harder and more $