Search results

Thinking about getting a leader hydrotronic , I already have the leader ecojet 110 pump Im Finding it difficult to find any good information on what it does exactly and it’s specs If anyone has a link to all it does I would appreciate it My question is I have 55 gallon resovoir that drains...

It’s .8 Update second day and more leaves are looking like this

It’s all in the original post, the light and pics Light is optic slim 650s at just over 24” and not quite 70 percent strength Ph is at 6.0, i stay on top of that

Update on the next day-they are no better but they’re no worse either. I used Cyco brand coco from a bag, which is prewashed and buffered. Have used it for 2 yrs without a single issue. I did give it a good rinse before I used it (as per usual) I had fed it after with half dose of nutrients...

Hey everyone, I had these plant in 1 gallon coco pots, looked great. Last night I transplanted them into larger, 3 gallon pots using the same coco. Overnight most of the fan leaves turned into brown/purple in between the veins and some have curled at the edges. Canna nutirents-last night was a...

Hey everyone, looking for ideas on what may be happening with 1 plant, the rest are all fine The edges are curled up and some of the tips have bent down and it’s a darker green colour than the others They are in floraflex pots, tested and all get the same level nutirents. -Canna nutes into...

Thank you, I got the exact same advice yesterday from the owner of the hydroponics store I go to, that’s what I’m going to try

So I have the temp dialed in around 74-75, lights were raised up a few inches, power turned down to 25%, humidity is between 55-60% Light feed scheduled with canna coco nutes, double check ph and it’s 6.1-6.2 Most are doing ok (except the leaves don’t have nice green look to them). There are...

Do you have any other info or help on the spotting, they have become more prevelant last day or so I’ve lowered light power , humidity is close to 60 %, raised the lights a few inches, temp is 73-74 I have used the light feeding schedule from canna and have been hand watering them, double...

Thanks for all the info

Thanks for the advice Your absolutely right, I read it wrong on their website-Ive now lowered to 25% and raised them a bit Turns out ph was off, it was over 7 when I got home, then an hour later it was 6.7. I soaked it in solution and recalibrated it, hopefully it’s all good now

Ph is 6.1-6.2, canna nutes following their schedule for veg cycle I’m feeding them twice a day now about a litre, they are getting runoff as I hear the runoff pumps kicking in Yesterday was the first time I mixed up nutes in the big drum, but I hand watered them. The system is set up so it can...

they seem to have bounced back a bit. I lowered the light power and raised it a bit yesterday. This morning I saw this, would this be light burn?

Was at 80, fan have it down to 74 now They are much more powerful lights, which is why I have them at 50% max, maybe I should lower a bit?

Good morning everyone-first time indoor grower here, I just moved the plants into their final home yest and they are not looking too good. Any recommendations on what to do would be appreciated They were in small containers, canna nutrients, coco, vivosun light, fan humidifiers before I moved...

Works great now that I moved the pressure reducer higher, thanks for asking Last 2 buckets on the way, and seedling are getting bigger Love this community

This is the final setup, except I’m going to raise the pressure reducer and the valve up above the horizontal branch line

I got it all sorted, the feed pipe comes out the bottom of the resovoir. The pipe that goes to the top is to help with siphoning and dialing in pressure. Thanks to everyone for their input

I have dry fitted a new idea, and I hope this will prevent siphoning (and just work well) Any feedback would be appreciated the only concern I have is where it comes into the tent and will be going straight down to the buckets level, then a 90 elbow -into a short piece of pipe -into a tee (not...

Thank you to everyone that’s has responded. I had purchased air bleed valves but I don’t want to use them as the tank is not inside the same room, unless I can find ones that you can plumb that water back to tank I had another idea of adding a 120ac solenoid on the vertical discharge (before...