Search results

Ive had it for about a year. For sure. Ive debated cutting slits in it to vent but never decided to. Its never on for more than 4 hours at a time. Occasionally 8-10 but rarely. And it never really gets to warm. The plastic will get cold because most places i take it are a little colder...

Autotune really works the best. Most turn red on heat up even if they barely overshoot. Mine over shoots by about 15-25 but its because its going from room temp to 700 (ish) and the thermocouple is in the end and its usually the middle ring that gets red because its the center of the coil where...

Yeah SSRs are some tricky lil guys. One can last damn near forever in some shitty conditions and others fail in prime conditions. One reason it was probably never mentioned was because the first DIY enails were made using all metal housings so they had built in heat sinking if you will. I...

Yeah the SSR creates little heat. Thats why i always recommended using the 25a vs smaller 6-8a ones. All i did was raise mine up with small bolts in each of the holes and used epoxy to connect those to the housing giving it about 1/4-3/8" of breathing space. Never really gets warm even after...

Before purging. Generally most people usually will blast into a pyrex measuring cup or something they can pour. Then when its almost done evapin and is down to about 150-200ml they add the cold-room temp iso/ethanol and this drives out all the butane basically due to the iso being warmer than...

Im also about to start messin with different boxes and shit. Im gonna mount this one in a case i found at harbor freight for like 10 bucks. Should be able to fit my piece and the enail in there no problem for a nice little enail on the go. Also, gonna be gettin a generic pelican case to do it to...

After all my experimentation ive noticed that the coils are all slightly different and not all settings will work with all coils. Auto tune seems to be the best because it constantly monitors the set temp and actual temp and changing conditions. Its nice because some times were in really cold...

I meant convert one of your nails to work with your coil. hahaha. Sorry for the confusion. But yeah if you have the infiniti style you should get a flat coil because then you wont have to buy anything where as the 16/20mm round coils only really fit certain ones. You should throw up a...

Nice! Forgot about the on/off switch. You should be able to convert one to accommodate your coil. I know for the infinitis they have ad adapter piece of you can use them the old fashion way.

http://www.ebay.com/itm/3-PYREX-25-ML-Flask-Beaker-2-No-4980-1-No-5020-/271714999119?pt=LH_DefaultDomain_0&hash=item3f4379db4f...

http://auberins.com/images/Manual/SYL-1512A2instruction%201.0.pdf Pretty sure thats the right one. Also id put the plug on the back side of the box instead of the front if what im thinking it looks like is. Just for convenience and stability. As for programming you really shouldnt have to...

I think a lot of people use smaller SSRs than the 25a ones and most of them work and should be fine since youre only using a 200-250w coil which is just over 2 amps. The amount of cycles its rated for is probably more important and whether or not it gets hot or has heat sinking so it doesnt get...

Yes teflon is non reactive with damn near everything out there. Theres a few chemicals that react but i cant name them off the top of my head. But yeah its good to blast on. I got mine from oil slick but there are places on ebay that sell it as well in thicker sheets and bigger rolls for cheaper...

Forgot to post this one! Made a shelf in my chamber to drop my temps a bit since my nuwave2 only goes down to 100 3gal chamber straight on nuwave2: 95-100F 3gal chamber in 5gal pot on nuwave 2: 90-95F 3gal chamber in 5gal pot on nuwave2: 85-90F Made out of some scrap stainless a friend...

Alright gonna be postin quite a few photos. teflon don tek haha Side purge til i get the vac oven. Cant wait to just lay the sheet flat and get a smaller muffin. Worked pretty well but we couldnt put it on heat so we could only get so far. After the main muffin dropped i was able...

Well shit keep me posted. Ive been wantin to make my own for a while but time and money are always an issue but if they were pre made itd be easier to save the money for a fixed cost haha. Keep up the good work too!

amazing! put me down for 2 of those big panels! hahahaha

lookin good! im uploadin some pictures from a trim run i recently did. Used the good ole ptfe too!

You could also use microfiber glass i think its between 10-25u. Not sure if it would hold up to the pressures though. Only seen it used in scientific labs/ LHO extractions.

bizzybee on ig makes 2u ones i think. As well as 5u. Theyre probably pricey but itd last for a long time thats for sure. Ive seen some smaller micron screen/gaskets on sites before when browsing but is always hard to find em in stock.