Search results

Hey, just jumped over to check your grow out. They look pretty happy in the latest pics. Have you tried running the fan at full speed for a while to see if it helps with the humidity? If it brings it down, a 6" setup would probably be a good upgrade for you.

Thanks for the info! I will take a look at what you got growing. Good to know about the humidity, I was worried it was getting too low right now, a little bit extra may not hurt this time of year.

Thanks for the heads up. I have a 6" hyperfan with carbon filter pulling the air out, but it is set pretty low. Will keep an eye out for any issues. What is the cause for you, too much humidity / not enough circulation? I have not really read up on powdery mildew.

Time for an update Day 56 Lights off early to start 24H dark period Day 57 Start of 12/12! Day 64 (8 Flower) Growing up! Few of the smaller leaves way down low dried up.. just a little to clean off but not too bad. I have cleaned a few other ones that were yellowing down there...

Thanks for posting up. I am growing a single blackberry but I am a bit behind you, about to switch to 12/12 tomorrow. The Nirvana info says 9-11 week flower so I think you are looking good (not that I know anything :bigjoint:) There are a couple of other threads with blackberry in the grow...

I have been at 200w for the last 9 days or so. I figured I would start bumping it up slowly again after the flip.

May take you up on that. I just gave it an extra week of veg, may not have been the best idea after seeing this! :dunce: I only have 1 plant in the 3x3 though so hopefully wont be an issue.

Lol yea, that extra week of veg may not have been the best move :eyesmoke: I took a look at another grow journal with a blackberry and that thing is tall, looks like I might be in for a tripple in size :wall: Should not be a problem, just all unknown at this point. Also, I need to do some...

Thanks for the pics, I am on my first grow (blackberry) under a COB setup. About to flip to 12/12 but it is super short and bushy, looks like she will be getting much taller.

Alrighty! Small update, just been letting her even out a bit and watering like normal. Night temps and humidity are getting a bit low now that winter is setting in but do not think it should be an issue. Will keep an eye on them though. Day 55 Gave her a good watering, tomorrow she will...

Its been a few days! Keep pulling the original tops down one node at a time, and also pulled a second set of tops down using some velcro. I am not really sure how many more tops or how much bigger I should let this get? Could I run into a problem where it is to big for the amount of soil I...

Another update. Day 42 Had to go back down and do some more training last night. Bent the 4 over some more, basically just moved the rope up one node. Trimmed a small hand full of leaves down low in the center. Bumped the lights up to 180w. Day 43 New tops coming through, so...

Thanks for all the input to the thread! I thought it may need some recovery time, now I might go back and adjust tonight. Is the trimming just for light penetration? Cleaned some of the original leaves off the bottom but that is about it.

Another quick update. Day 42 Responding well to the LST. I kind of feel like I did not do it right as the tops are kind of the top again but looking closer some of the middle growth has shot up quickly. I think it is good but not sure if I should try to pull down the 4 tops again yet or not...

I can't say for sure, I kind of Mr Magooed my way into that 4 topper. I cracked the main stalk by accident after doing some LST. It broke just below the 3rd node and was topped just above the second. I don't know if the LST + the topping caused it or if I was just lucky.... probably just newb...

Small update. Bushing up some more. May have to clean some of the lower leaves off. thickening up Was a fem seed but still nice to confirm its a girl. Decided to give LST a shot again. Just used some hemp rope and poked holes in the pot.

Been running my 4cob setup with 3d printed frame connectors for a bit over a month now. Screws are way quicker/easier for sure, but it was only about a day of print time. (2 pieces at a time ~6h a print) This is PLA at 50% infill, it is very solid and the fit is super tight. I tried some lower...

It is still alive but no roots yet. Will keep it going but I was hoping to see something by now..

Nice! That setup should do you well. Yea, looks like a very lucky slip thus far :P Small Update DAY 34 Turned lights up to 160w DAY 35 Looks like I fumbled my way right to a 4 top :bigjoint: 4 tops Nodes thickening up

Plastic is pretty cheap so I don't think it would be too much, definitely more than screws though. I'd have to weigh all the pieces, but should be less than $10 worth of plastic. If you are really interested I may be willing to print some out, just be a few days of printing and a disclaimer...