Search results

There is no cheap Lumen meter you would need do do some math to convert as Lumens is an angular metric of light and simple sensors are not capable to read this. Cheers Mark

Hey dabudmanman likely we can get you an running with the 675 led skin quickly in the new year if thats your preference let me know what your timing needs are Cheers Mark

Hi Grisbi Hope your well. have you had a chance to power up the strips yet? so you want to be able to control the total rig for each spectrum? Cheers Mark

Hey Rocket When I get back in to work next week I will get some readings and post them. this is only a 1.7mm square chip like Cree XQE so raw moles will likely be lower than XPE, but it is a much cheaper chip however so you can use more of them Cheers Mark

Yes, as I said the blending of phos and non phos leds does not typically give you a complete blended solution

Been messing with the concept as well first 5050 boards we build are 3000k 70 CRI with the Cree 660, the red certainly pulls on the spectrum dropping the total spectrum by nearly 300 Kelvin and does improve CRI and shows the SPD power of the red, but is difficult to get blended phos/non phos...

Hi dabudmanman Yes we can do this for you, when do you need them by? XMAS is fast approaching Cheers Mark

We appreciate your support, it helps us keep developing new products for the community Cheers Mark

You can only go by your experiences in life so feel your anx on DHL, we use them because they get our stuff to customers world wide in quick time and of the 000's of packages we have sent I think we(they) have lost maybe 1 or two, whereas Postage service, well how much time have you got. Your...

feeling the luv:smile: Cheers Mark

would never use a hot air gun on plastic package leds, use a hot plate or the hand solder method you mention Cheers Mark

W sell the Eb strips adn they are good value but you need to remember these are fibreglass boards and once you start cranking the current your going to struggle to get the heat out of the leds, the moment you get into that situation all numbers around their efficacy quickly dissipate, thats why...

We are looking into the supply of these as we speak, will advise when i know more Cheers Mark

No problem happy to make a mix of 660 and 630, let me know when your ready Cheers Mark

Ok so the board I suggest does not need to have 15 leds, we can remove leds anywhere on the board and just drop jumpers in place of the leds, what do you need? Our SOLSKINS with a single line of deep red would have worked beautifully in this frame. Customer just won best flower Canncup under...

This is our red combo board https://www.cutter.com.au/product/cutter-zge-280-sxp-c/ 280mm or under 1Ft Cheers Mark

Im getting some of the reference boards so will know when we load some up. Cheers Mark

you mean on the reference design? Cheers Mark

Cree will soon release Deep red and Far Red in XPE-2(current versions are XPE-1) Up to 68% higher efficiency than competing LEDs Only LEDs with >3.2 μmol/J PPE at both 660 & 730 nm •Up to 57% higher minimum flux output •Lower Vf for improved efficiency •Enables 3.0 μmol/J full spectrum (W+R)...

Hi Random yes your correct the XPL is recommended as the replacement for XML as it uses a slightly smaller cut down die of the XML that allows it to fit into the 3.5mm package, so same spec just the smaller footprint Cheers Mark