Search results

Do you know any good alternativs for the meanwell hlg driver? Is there anything less expensive with good quality, I need a new hlg 480 or two 240's but thats more than 120+€$ I have seen lab adjustable drivers on eBay, And smaller units from osram and phillips(under 200w). What do you juse...

This is not my mother language. But the bigger Problem is my correction Programm it is a peace of shit. And almost every time iam at RIU iam stoned, that dosent makes it easyer, But i will give my best

And from Start to finish e4h ? Veg days 10-12

Ok, i though about e4h flooding. Yes i flood to 8 inces and pots are 9 inces, so the top layer (1inc) stays dry,no algee

I changed my set up a bit. I hade 1 tray for all plants , just 3 inces high. Now i have pots filled with 5-6L hydroton(9feet high pots) And i flood them when light is on every 6 hours . I have to flood up to 8inces, that needs way longer(start to finish flushing needs 15 minutes) My...

Yes i change my rez every 3 week, but i have to refill +-40l from mid flower every week. But its not needed, i could just refill it every week or two during tue hole grow

Pool shock too, I though about buying h202 for more oxygen.. And i was not sure if the Pool shock is realy 100% safe in this use. I make my on solution with pool shock 1 Gramm for 1 Liter water and then i juse 0.5ml for each 1 Liter in the the reservoir 100liter res. 50ml soulution Every 72...

Led lensis , dust, pflant material, Pestizide stuft like that I just want my strips to work as long as possible as good as possible

So , do you clean your led or do you juse optics to Cover? I have a stripe build, and iam not sure if i need or should or should never clean my leds? And with what Kind of Cleaner I just want my strips to gold as long as possible with nice Bright light ;)

Hello, I hope iam not the only one how finde this interessting . I want to know which LED diods we can juse to grow. (Just the good ones) So i start with Samung lm561c Samung lm301b/h... I dont know a lot about the smd cree osram...

Thanks , i Think next build with B driver , like the poti's

Thaks for your advice ;) And thank to Rockets soul , I love riu ;) I thought it was something wrong, now iam happy ;)

Not sure what you meanO-10 poti O-10ohm poti? 100k poti?

1. I have to check the total Outputs, in full Power (Inbuild Amps and volts turn of max/hlg240-24a) I Think its more then 7% of 240w. (I checked it , 1 driver goes from 20-290watt(+20%), and the other one from 80-270watt(+12%). I just can adjust it with the voAdj. The ioAdj "screw" does nothing...

Ok, Ich allready have q diy set up, There is something "wrong" or special.. I have 2 panel ( each 1,5foot × 3 foot) Wired in parrallen/ konstant current(volt) Each panel has 1 meanwell hlg240-24a My Problem is, if i turn the volts and amps up(At tue driver with the little screwdriver)...

Hey I need to buy a lot of led for a shop. Lm561c , lm301b strips . Or maybe some of you have a another good trustable adress for me. Thank s ;)

Can i juse sulfur in my hydro flood and drain system I juse activ chlorine to sterilize my N.solution But maybe hpo would be better? I dont know if the active chlorin is 100% safe for me

When do you give it to the plants,how long and what dosing Since i switched to led i Think there is much less taste (samsung strips 3500k) Flood and drain with hydrocorn

I watch a lot viedeo and read a lot the Last days. The most viedeos i watched, they make it with Single pots. But i would need a bigger flood tray , now the water rises just 2-3 inc . With pots the NL must be 6-8inces high Did anybody done both? With pots and without?

These time i mixed a bit more and its much worst then normale. My haze Site is very good no Problems. the other Site ,the skunks looking nice, but they stollen the root space from 5 other plant(2×white jack :(, 2× afghani,og-k), never hade that much lost. The other plant are not so aggressiv in...