Search results

get your water to 5.8 give it some cal mag make sure ur neut solution is around 1.4 ec and u she will be fine. do you use a humidifier? are you using RO water in it?

Looking at your light 6 foot it says its putting out 720 ppfd this is a bit high for seedlings but i also think you could be over watering and your soil might be a little spicy. just let them dry back a little and ride it out .

Most lights come with 4 holes you can take each clip and by first attaching the "block" side to the light then looping the "rope clip" side over the bar in the top of the tent and hooking it back into the light. You can also take the "rope clip' side loop it over the bar and attach the clip to...

I think most people here are stepping down gradually, im using a ac infinity controller and have an automation setup that turns the cycle of 1-2 min on 3 min off ,then turns off for a full 10 min at the beginning of each hour. im still testing these settings but im seeing a gradual decrease in...

one of these would be amazing in my thermalelectric cooler!

I recently got the ac infinity 19 inch bowl trimmer off ebay offered 40 bucks and they took it haha ! anyways what i found works best is not to pack the bowl full, but instead fill the space in between the silicon fingers about half full dont have stacked buds. You want space for them to roll...

yup it is im using this because it was an extra one i had i think they even make a wifi inkbird that is still cheaper, the only benefit is i can see it in the same app with my other tents

You dont use a compressor type of Ac unit because it pulls way to much humidity at a time and this will effect the end product. You could "hack" the kooltron by direct wiring the peltier to the ac infinity controller directly. but within the controller you will need a complex automation to...

Yes you can use a controller 69 I am using one for this and its wonderful.

I have mentioned this in another post, But make sure the power source of the controller is not plugged into the same outlet, RF interference from ballast is an issue. I dont use my light one port one I dont know how the controller decided what to power it, but thats what i do anyways and have...

Do you have the controller plugged into the same power source as the HPS the controller could be getting hit with some RF . what ever is powering your controller make sure its plugged in something that the ballast isn't not .

they look a little dry

Ill be honest i didnt read a thing have no idea whats going on just wanted to say, in the middle of the pandemic i decided i wanted some shrooms so i went online got some spores got these bags that came with everything in them i needed. and i didnt use a hood or nothing special just a lighter to...

I use a duct coming out of the top of the tent to a fan and filter i have just sitting on the ground like Floor>filter>fan>duct up side of tent>180 into the top. i never have to run the fan past level 2 its not sucking a crap ton of humidity through it and its quiet. My ac infinity tent also has...

Feeding is really dependent on the plant itself and what the soil is telling you. Get an EC meter and water with plane RO water check the run off PH and EC. once you know that you can start to adjust im using Promix HP and my run off i keep it right around 3 but this number could be way to...

what would happen if you took a tent with say 6 auto fem and spray this with silver and just let them cross pollinate. would they just be filled with random crosses or would they all end up producing the same seed

Clones are a copy of the doner. If they came from a female they are going to be female.

im also having the same issue homie Hi! im Joshua ive sent emails to every email i can find for them haha

Your meter is in the us/cm range meaning its a 0.000 so at 0600ec u are at .6 early veg 1.2 is what im doing. thats around 600ppm in ro water. so Honestly if its ur first feeding i would do 1.2 with the base at .6 and see how the plant acts and go up from there its easier to go up then go down.

If money is abundant i would contact a manufacturer and make my own light to what ever i wanted.