Search results

There are many different places to get COB's already made or DIY kits. But be careful and do your research as the COBS can go from low quality $2 chips to high quality $50-$80 chips The high quality ones put out the correct spectrum and are efficient. Cheap ones not so much. Basically after they...

@Mr.Kku you are really close to Timber Lighting http://timbergrowlights.com/ they are by the 56 & 15 if your in SD would defiantly stop buy there and window shop the COB's if I was you! Live a few hours away was thinking of driving there myself to get a new light instead of paying shipping, but...

Seal the shed with tape or something, add weather stripping to the door and get a dehumidifier?

@CaliSmokes would chill a little dude as making threats over the internet can get you in more trouble that growing in CA lol

It's probably not light distance but light output if that's the case putting it closer wont help :/ could get a new bulb that may work would stroll threw the gardening section at your local hardware store might find something in your budget even if it's just a few dollars.

It's just a small fixture for starting seeds with two 1' T5 bulbs not sure on the spectrum but seems to work great for my seedlings. Fits perfectly around a starter tray as that's what it's for

Azamax is a good organic deterent/killer https://www.planetnatural.com/wp-content/uploads/azamax-label.pdf

Stringy because the lamp isn't putting out the light they need so they are stretching to it. You can get a little two bulb T5 seedling light from HomeDepot or Lowes for under $20 and that will solve your problem. If they stretch to the T5 just raise them closer to it or lower the light. Light...

Carbon filer and muffler will be needed for smell and noise they also help trap mold spores and other things you don't want in your grow area. May even need a heater/AC and possibly a water chiller not sure on temps in SD but imagine it gets hot. Could grow in soil or COCO and eliminate the...

@Cap10Ahab it's why we are here lol find solutions to our mistakes and see others mistakes so we don't make them! or it's why i'm here at least.

Would suggest watching vaderog https://www.youtube.com/channel/UCqu_M0ARO7Sanbf_hte0Olw on youtube lots of science stuff on breeding and setting up a breeding chamber also think he goes into it on the growtube roundtable. https://www.youtube.com/channel/UCzzCZoXYp5JH7QKhWadOQcA Growtube...

Going down when always? When the lights first turn on they will be down a little and rise up for the light. Also in veg after a certain point the plant goes screw you i'm going to sleep! and the leaves will droop a little also even though the lights are still on. Also depending on stem strength...

Lol @Litthefrog prob shouldn't tell on myself but I actually watched a video of 3 guys stoned out of their mind putting my exact tent up and failing miserably. Goes without saying I was smoking wile watching this hour long video and thinking how stupid they were. Then I put my tent together it's...

Only issue I could see the carbon filter causing is it will probably suck up some nutrients and make the ppm reading inaccurate if you try and measure the runoff. Could also cause some kind off issue if the roots try to grow into it as the nutrients could get locked in the carbon? Question mark...

Not trying to be a debbie downer just looking out for you lol wont happen again

Unless you pay for the electricity in that garage I seriously wouldn't grow there not even sure if it's possible. Imagine the lights and any plugs are on a house circuit (paid for by the landlord) mostly for lighting and the breaker is probably low like 20 amp. If you do grow and somehow don't...

Would suggest posting your driver and light under indoor/led maybe one of the LED gurus there could hook you up with the info you need not sure that they hang here with us lol

Tells me it's 12 volt 1 amp driver who made the light? Guessing it just controlled one channel would also explain why only some not all of the led's went out. Unless someone tells you what controller to get i woulden't order anything yet as might be the right one but not fit the case lol

Looks like the driver does it have any numbers on it? Some places for drivers http://www.rapidled.com/drivers/ http://www.cutter.com.au/categories.php?cat=LED+Drivers+AC+and+DC Few others but I have no clue on their rep but if there is a number on the white box you can probably search google...

If she pulls threw I will make a clone so someone can pollinate her call the strain indestructible OG!... all the new grower will want her babies lol