Search results

slow your roll with the nutrients dood, try 1/4 strength or 400ppm for clones and plants less than 8inches MAX 400ppm

you have a timer for your fan i assume, if so just set it to run for 15 minutes every 1.5-2hours, leave are smaller room fans on, 70% is too high especially since theres no bud yet. now since you need to operate the same fan that controls your temps to control humidity, it may bring temps too...

thats how you know dubs is a pro, is that perlite under those RW cubes? this is very good and when your cuts root and say your room isnt ready to take them yet you can keep them there for a while and not have to worry about brown/dead roots, plus its so much easier to water. that perlite will...

82 is fine, over 85 could be an issue, especially when you have water at the bottoms of the pots . at higher temps you may need to make sure water is more available, how often do you flood? the average user goes every 3-4hours. yes open some flaps, if you have air going out you need air going...

no no i meant it the other way about pushing air, i run sealed lights i just recently turned them around to suck hot air out rather than push fresh cool air in, i have a closed loop 3x600 per 424fan and it does the job just right in the winter, summer i seal the whole room up no intake fresh...

ok boxing, i saw the pix, i see you have a fan on the end of the lights and they have the open end, what i dont see is where is your fresh air coming in from? you need to have intake air come in at the bottom of the room on one end, the other end at the top should have the extraction. is that...

peroxide in water will go 3-4 days before that extra oxygen molecule dissipates, if you got shit going on with your roots bro do not fuck around, go get the hygrozyme, forget everything else, its $45 a qt but worth its weight in gold, your roots may be suffering because you dont have an airstone...

you know what i used to do when i had potted plants in dirt that were over watered? added 35% peroxide to water and fed, this was the only way to get o2 into the rootzone without having to wait a few days

for the sake of keeping the water stirred up put one in, in my view, the more O2 in the water the better, roots explode from extra oxy

just trying to help you avoid having to send back the unit, that means 2 weeks down time i assume, even if its the timer or float valves its gotta go

can you put the unit back together without them noticing? its most likely a float valve but that thing is hard wired to the timer box. also did you try to suck fluid from the hose in the res? try to syphon water back to the res when the drain cycle pump comes on. trust me you gotta try this...

if i was you, i would germ all those seeds throw them in hempys, select the most vigorous for moms and flower the rest, i prefer to keep moms in hemps for atleast 6 months. or if the timing is right you can wash off the perlite and toss them in the EG, works like a charm

i used to have this issue of yellowing clones, it often was a race, between the roots developing and the leaves falling off. i have 40ppm tap water, all i do is add 150-200ppm of cal-mag and thats it, or thrivealive b-1. many people often say nutrients are not needed for clone stage, but just to...

i/m still confused about this air flow temp issue, if you can take that outside air, blow it into your hoods then blow all that back into the tent , then there should be even better results if you left the fan sucking out the hot air , may i ask if you have the fan sucking out the air, what is...

off topic, since theres many people old members and new ones who are literally coming from all angles with this system, who thinks this thread should be made a sticky? im sure many of us found this thread by accident and theres nothing else on RIU for CAP/multi-flow users

the whole reason why i wanted you to suck the air out of the room is for humidty control aswell, if you have a carbon filter for smells all you need to do is hook it up to the fan that blows into the tube

wait what did you do with your duct? let me see if i understand....cold air from window ----->fan----->cooltube--->into tent? thats not what i first meant for you to try. disconnected duct hangin/cold air supply ---->fan blows into cooltube---->from cooltube ducted out tent. that fan being...

Boxing, dont go run out and spend money on my account, i used GH flora series too and i seen so many people have good results, i hate the stuff and i tried lucas, label dose and another recipe, all i ever had were unstable PHand PPM, nute burns and deficiencies, and found myself with a new issue...

yes, a freshly rooted clone or seedling is most likely dependant on the starting media(RW) for water, if it is constantly soaked it will deprive that very fragile and young root system of oxygen, a good 1/2inch isnt much, but think about it, your plant wouldnt be ready for transplant unless it...

how about trying this, disconnect your hood from the cold air window right, leave it open ended but leave your fan on the other side of the hoods so it sucks hot air from the hood and room. actually you can have your fan blow/push air thru the hoods or suck, as long as its open ended on one side...