Step 9 Completed (READ AND FOLLOW THE FIRST PART OF THE STEP OR YOU CAN SEVERELY DAMAGE YOUR SKIN OR EYES, YOU WILL ALSO NEED SOMEONE WHO HAS EXPERIENCE IN A COLLEGE LAB TO CONTINUE)
Using PURE METHANOL WITH NO WATER (Water will react in a violent way with the acid when you add it later) dissolve the Cannabinoids in 10g Methanol to 1g Cannabinoids. This should be done in the glass beaker or mason jar.
Next step is to add 100% pure Sulfuric acid at 1 drop per gram. So if you don't have a gram of Cannabinoids, either save what you have or stop after step 8.
Before you add the acid, begin stirring the methanol mixture with the glass rod. While still stirring (slowly but completely stirring), add the drops 1 drop for every 1 gram you have.
Now, pour the mixture into the pyrex. And put the pyrex into your Reflux machine in place of the stainless steel pot. Pyrex MUST be used, the acid has a chance of eating anything else. If you use metal, you are extracting metal. You will not use anything but the Pyrex this time, you don't need the Colander or Cake pan. You just want it to evaporate, and fall right back in.
Boil for 2 hours. The acid will not evaporate, and will remain in the glass. WAIT FOR IT TO COOL COMPLETELY BEFORE CONTINUING.
It is not ok to add acid to water, but it IS ok to add water to acid. So now, cool the solution of acid/methanol/cannabinoids and mix in an equal volume of water, plus 1/2 the volume of water in Petroleum Ether. So 2 parts Methanol mix, 2 parts Water, 1 part Petroleum Ether.
Do the same thing you did before in the mason jar, and flip the solution over 25x, releasing pressure each time. Then in the end pour the mixture (beer style to prevent bubbles) into the 2 jar blowing apparatus that was created earlier to separate layers (or your glass bong).
Use the same method as before to get the Petroleum Ether alone. But it IS NOT ALONE. DO NOT EVAPORATE AND SMOKE THIS, YOU ARE NOT DONE.
Measure out 4x the volume of water that you have in Petroleum Ether, and in that water add 5% Baking Soda... 1g baking soda to 20g water.
The baking soda (a base) will react with the sulfuric acid (an acid) to create Sodium Sulfate (a neutral, non-harmful salt).
Remove the Petroleum Ether layer, then add more water (no baking soda this time) and Petroleum Ether and repeat.
Set-up the reflux machine with the cake pan and the colander and the stainless steel pot, and remove the Petroleum Ether from the Cannabinoids.
You now have a clean product that is better than any hash I have ever personally come across, and I have been from Texas to the West Coast, to East Coast, and to Colorado (where I am now) .
This is not my method, it comes straight from the Dr. Atomic's Marijuana Multiplier Book. I will soon preform this method myself, and will revise the method to fit modern availability over the next few days.