I've seen stinkbuds setup before. The concern I have with that system is the spraying manifold can get clogged by roots easily. The fence post chamber is really small 4" x 4" or something. I originally wanted to do 10" pipes or something with daisy chained sprayers on the top, instead of having piping actually going through the tube itself.
I wanted to run 8-9 8' lengths of 10"-12" or whatever but it was recommended I use pods that size (4'x4' or larger).
Tubes do seem easier to manage on paper. I'd still like to get 1 plant per square foot.
Get some 6" fence post
drill holes for rubber stoppers on the side of fence post
rubber stoppers with a 1/4" hole in the center
1/4" od tubing ss
tap one end for the sprayer to thread into
use john guest fittings
use egg crate for bottom of tubes wrap in silk screen
seal the tube ends
Use air stone in resovoir
use 1 1/2" bulkhead fitting for drain
use 1 1/2" PVC back to resovoir
use bio diesel bucket filters in reservoir from fence post drains
Use iwaki 30 or 70 RLZT pressure pump depending on how many sprayers
use filters before pump
3 way solenoids for every spray nozzle or one large 3 way solenoid for the whole system
By using 3 way solenoids on every spray nozzle you are able to run a complete recirculating system when sprayers spray fresh 100 percent oxygenated nutes are sprayed.
Use 2" to 3" net pots I like 3"
Scrog it
keep temps in room 86-90 degrees keep reservoir 76-78 degrees
run c02 1250-1500 threw whole cycle.
LPA system