BHO with Vacuum oil/wax tutorial

[sacpirate]

last time i touched a blade was for cloning :]

ever since i've been blasting on parchment.. i see zero difference in outcome, but i get a nice clean run every time, %100 of my material is retrieved as well :] no cleaning/scraping dishes blah blhabblhaaaa

the reclaim process on a t175 is nearly 2 hours i f done properly ie: low n slow. its completely passive so u have to wait fot the butane to vapor up and travel to the chilled spray tank. plus u can only get about 50-60 grams in the tube. i can blast a lb before my buddy gets 2oz done in his "tami" as he likes to call it. he also dont use n_butane. its only 5x and imo after a few runs it get dirty but i have no proof of this. just see a slight decline in finished product.

as far as silicone, i tried yesterday and it doesnt react well will the cold. however its great to use in the vac chamber much like your home made parchment tray which i give u props for.

im very very new to all of this bho stuff but ive been trolling riu like a madman doing all the reading i can since January. im rockn a 100grm tube, 5cfm two stage, and a chamber from inlab designs which i would not recomend as shipping sucked my slick nutsack...took a month+

 

[sacpirate]

oops i quoted the wrong post lol oh well hope my point is understood

 

[Guzias1]

im very very new to all of this bho stuff but ive been trolling riu like a madman doing all the reading i can since January. im rockn a 100grm tube, 5cfm two stage, and a chamber from inlab designs which i would not recomend as shipping sucked my slick nutsack...took a month+

sounds like a champpp setup! ellooooooo mang, welcome aboard.. you are more than welcome to display your gooooooods involved in the process, along with steps on how you do it as well.. We all pick up a new thing from one an another..

I have tried to spray right into a silicone cupcake maker once.. well, i did, then added a 80F warm water bath beneath it.. WELL! that was dumb.. the silicone cupcake maker inverted itself seconds after i put the water in.. all my oil spewed into the water.. i quickly gathered the oil.. but it was all watery after that.. fun learning experience :]

 

[650baquet]

last time i touched a blade was for cloning :]

ever since i've been blasting on parchment.. i see zero difference in outcome, but i get a nice clean run every time, %100 of my material is retrieved as well :] no cleaning/scraping dishes blah blhabblhaaaa

I've always used parch paper for BHO but my first trials with iso were done on glass...hated scraping, always felt there should be a more efficient way.

 

[650baquet]

oops i quoted the wrong post lol oh well hope my point is understood

Understood loud and clear lol. Haven't seen you on this thread so welcome, and i'm also very new to BHO still experimenting; all my results will be posted here. Hope to see some results of yours sometime.
PEACE!

 

[sacpirate]

ive been trolling with no info to add yet so i haven't bothered. yesterday was my first attempts on my own with no tamizium and using my own equipment and material. decided to do it alone after lots of my trim disappeared from my buddies house and he played dumb about it all. sucks cuz he has lbs upon lbs of gdp trim to use but mine was 91 og and my own strain sour patch kids both of which have very strong terps. then we ran a sour patch run and he never purged it for me. i got what looks like black tar back. fuck that situation haha. live n learn i guess. pics to come soon. purging my 3rd run now.

im actually much more into edibles as far as a focus goes. my wife and i provided norcal with the best tasting strongest edibles available at dispensaries. so while many were getting into bho a few years ago, i was perfecting cannabutter. now that it so ez and dialed in im lookn for a new venture.

regardless im lookn forward to soaking up all the knowledge u guys have and hopefully save myself some headache in the future. stoner mistakes are gonna happen but not wasting time and money on trial and error is priceless imo. i appreciate you guys taking time to share

 

[sacpirate]

ok here is my first run of 24 grams just to see how it went. my first muffin or wats left of it haha
after 8 hours purged. budder??? its like playdoe. not at all sticky of crumbly.

 

[sacpirate]

second run i used 5 grams of kief in a mason jar cuz i saw a video once wanted to try lol
purged all night and morning. maybe 15 hours total. pretty crumbly but still stick tobthe dab stick with ease.

 

[vacpurge]

home made parchment paper holder thingy??? lets see some pics.

 

[Guzias1]

• (pic​
  
  

• i p​
  
  
  
  

 

[Twitch]

its like a little boat

 

[sacpirate]

for my 3rd run i use a mixture of prob 20+strains. it has been collecting in a huge tuperware for nearly 3 years lol. basicly all leftover shake and stuff off the rolling tray that i saved for a very sad and rainy day as emergency smoke. other half was nugs that had been lightly kiefed. i stuffed the tube as full as i could, about 90ish grams, each time leaving room for 1" thick 0000 steel wool as a prefilter to the coffee filter. then i blasted 3 cans thru each. i let it sit at room temps for about and hour as the second run finished purging. then into the pre warmed chamber @115-118 for 5 hours then 130-140 for 3. im pretty happy with my "kitchen sink" run

 

[Guzias1]

nice 11:11 post :]

 

[Guzias1]

i beg to differ on the ending of this quote :] ..

now im working on the unrivaled taste ..

"

• i love ganja goodies edibles. unrivaled taste and potency."
  
  
  
  
  ​
  
  

 

[Guzias1]

How to make a boat! very simpleeee

need:

parchment
square/rectangular object
tape

pre fold the corners so you get the crease

this is the trickiest part. you should be able to figure it out though..

tape hols folds together better (harder on real parchment though)

 

[Twitch]

lol boat making 101

 

[650baquet]

beat that haha! only used one piece of paper too

 

[Guzias1]

View attachment 2601092
beat that haha! only used one piece of paper too

not my ride

 

[Fadedawg]

so I need to buy a set of regulators?

I am bringing this vacuum chamber across the border.... what the hell can I say im using it for if they ask? theyre not stupid... they will google "vac it pro" and see that honey oil comes up everywhere... so im kinda paranoid.

I don't use pressure regulators.

Tell them the vacuum chamber is for degassing epoxy castings, because that is how that style got started. As long as you don't have cannabis on you, what can they say?

 

[vacpurge]

haha little late there! I brought it across like 2 months ago and have used it over a dozen times. they barely even asked. just wanted the value. I told them 109. they ebayed it... ebay said 109. they were happy. I was overthinking it and just being a paranoid stoner. because if you google "vac it pro" its 90% BHO stuff....