you needs a better pump :]Ay input on 25.5 up to mabey 26 not being enough to purge I have my mityvac set up and that's the most I can pull and I don't feel like it is purging as much as it should I did it 5 times for 20 minutes each 5 times I pumped it up that got it pretty nice an smooth.
since you already pushed the heat that far, i would keep it a that heat, and at full vacuum over night.. just set it and wait. if you are lucky it will wax up, if you are fortunate, you will have an awesome very stable shatter.. ( you said the bubbles are getting smaller and smaller , this is good, but, not good if its all runnyy and bubbly, it should be more sappy, and bubbles should semi- slowly stretch when expanding, not just instantly pop.. .. its hard to tell what bubbles you speak of....for how long continuously? seems like it just keeps bubbling and getting smaller and smaller. I think my main downfall is my heating element. I need a lower temp one. even on 1 mine get red hot, I think its broke.
131 was the temp of the oil directly when i was pointing the temp gun at it... it seemed like it was way too hot!
do I need to keep the pump running to "apply vac" or can i close the ball valve, then turn off the pump, and let it sit at 27hg overnight.
yes that was the original plan... but I got excited the first night and varied it a bit. I kept that 100g bag of trim in the closet, and I chopped up 20g of nice bud instead. ran 2 cans through that and got around 3g of oil (its not fully rinsed).. I think 4g would be my 20% yield mark so there is probably 1 gram left in the extractor still. I put my finger in the stream of butane coming out though and it was no loner sticky.. hmmm..since you already pushed the heat that far, i would keep it a that heat, and at full vacuum over night.. just set it and wait. if you are lucky it will wax up, if you are fortunate, you will have an awesome very stable shatter.. ( you said the bubbles are getting smaller and smaller , this is good, but, not good if its all runnyy and bubbly, it should be more sappy, and bubbles should semi- slowly stretch when expanding, not just instantly pop.. .. its hard to tell what bubbles you speak of....
OR, you fucked up, and put toooo much heat initially, now you are a the goooo for life stage :] -if you feel you are a this stage already, i would drop the heat a bit, maybe down to 120 ( low enough to wear you still see bubbles purging..) and leave it just like that over night, you should wake up to a fully purged goo..
it happens.. but big question!
did you input 100 grams of material to pull 20 grams???? dayumm son, and only 2 cans!? that was the original plan right?
just FYI, that pump is used in air conditioning and was designed to run over 24 hrs to achieve less than 500 microns in your lines. Keep the oil fresh and it should last for a very long time.i am telling yall if u have a 2 stage i have left it running for over 24 hours
same as a car, it breaks down after so much use, In ac it collects crap. Your use may be able to use it a lot longer. you can get it auto parts or home depot, or ac supply house.what does the oil do? why does it have to be fresh?
my pump took the whole bottle.. where can I find more of this stuff?
keep on working towards perfection! im still on my way there ;pI am going to experiment more with that 100g bag of trim, make a few batches... go buy a griddle today and really try to perfect this.
still havnt had this question answered:
do I need to keep the pump running to "apply vac" or can i close the ball valve, then turn off the pump, and let it sit at 27hg overnight.
Yeh no goo it waxes and doesn't bubble and is stable like I can touch and play with it but there is a small sizzle when I dab so I know there is a small amount of butane in there but definently much better then when I didn't purge, but ieven when I didn't purge it would still not be runny it would still be waxy.yea all of yall that do pulls for 20 mins or some shit are yall getting wax or goo?
mine sits for hours at -29
i have said a couple of times to use continuous vacuum till it waxesstill havnt had this question answered:
do I need to keep the pump running to "apply vac" or can i close the ball valve, then turn off the pump, and let it sit at 27hg overnight.
if u look at my setup and looked at how i do it, you will see that i have an 8 inch inline duct fan venting my blast zoneYou also blast inside....lol!
Thought that was rule #1 for oil makers...
actually its the first pic, so you dont have to read far, if you look to the left on the pic there is my 8 inch duct fan venting out side...You also blast inside....lol!
Thought that was rule #1 for oil makers...