indrhrvest
New Member
Just picked up a 4.5 GPM @ 800 PSI pump for $300 on Ebay... whoot!!Aleady been there before.
Seller said it would run well over 150 misting nozzles.
Just picked up a 4.5 GPM @ 800 PSI pump for $300 on Ebay... whoot!!Aleady been there before.
Very good point, that has actually been a concern of mine with all nozzles. I love that you so many of you have already tried these angles. A toke in all your honours, for doing the legwork I'm to high to doI`ve used fogco and amfog nozzles which are very similar to those in the ebay link. They`re great with RO but very prone to clog when you run nutes through them. You`ll find you`ll get partial blockages which turn the mist into a jet and its all but impossible to unclog them. Things that dont work.. overnight soak in acid, compressed air and water at 50-bar pressure fired through the front to backflush them
Nice- an indoor kiddie pool that makes sure they still get a tan Kidding of course, you care to explain more what the plans are? Looks interesting for sure.
Atomizer pointed out to me in the past the chest freezer idea, especially if retrofitted with a warmer range thermostat controller to keep the chamber the correct temp zone for roots. You can pretty much make a chamber out of anything, wooden box with a pondliner, etc... I also don't believe you need to make the chamber so tall, 2 feet is probably enough. The roots hit the bottom no matter what, but that's not really a problem as long as you have proper drainage...So it seems like the best route for a novice seems to be the biocontrols and an Aquatec.
I love the thought of those SS, waiting to hear back on what they tell him on pricing! Even if the cost is sky high, if you need less, and they last longer then that's a win in my book.
To be honest I won't be using this to grow MJ (have a separate grow for that), but used to test a possible business opportunity growing vegetables. Saying that, I don't mind dishing out the extra for the SS unless they are something crazy like 500+ a pop.
*Edit*
http://www.ebay.com/itm/5-0-15mm-Anti-drip-Stainless-Steel-Misting-spray-Nozzle-/250986020460?pt=LH_DefaultDomain_0&hash=item3a6feebe6c#ht_1368wt_1163
Have these ever been mentioned? I imagine they have; aqua aircon sounds so familiar. No micron mist mentioned, but they run on 100psi, which seems less than others that appears similar (I think I've seen 500psi?)
I hate to think that two years ago I could have got all of these fittings and more for free from the company I worked for. If only I knew
Trichy, you mentioned recently about creating your own root chamber? Let me know what you decide. I remember reading it somewhere about using pool liner; I need to better label my bookmarks.
I was initially going to use an old chest freezer, but I would love to make my own; 4ft H x 5ft L x 5ft W as an example.
Cheers,
Thats a big chamber, 8x8? is it going to be MP, HP, RA or AA aero?
The root chambers will be 4X8X1 or 32 cubic foot. The base design will use two Shurflo 100 PSI pumps per rack pushing 45 Teffen nozzles. I am going to experiment with a number of other nozzle types and pressures so the setup may change somewhat.Nice- an indoor kiddie pool that makes sure they still get a tan Kidding of course, you care to explain more what the plans are? Looks interesting for sure.
Looks very nice, what made you decide to go HP hydraulic vs. the other alternatives?The root chambers will be 4X8X1 or 32 cubic foot. The base design will use two Shurflo 100 PSI pumps per rack pushing 45 Teffen nozzles. I am going to experiment with a number of other nozzle types and pressures so the setup may change somewhat.
The lid design is modular ie: you can switch out hole size, placement and number, or go to a 4X8 grow mat for micro greens. The inner manifold will also be modular and can be swapped. So if you don't like the Teffen nozzles, no sweat.. just swap the nozzles, or change the manifold.
If you are growing micro greens, you can do a three tray stack. I'm going to be growing Basil for our demonstration.
My goal is a MSRP under $6K (commercial system, heavy duty built), but the system is designed to be used with a separate nutrient system as there are no reservoirs, the system will be drain to waste.
For an idea of ROI, this system should be able to grow 32-40 lbs of micro basil per month.. micro basil is fetching about $32 per lbs.
A different pic..
View attachment 2261481
Be open to the idea you may be thinking of using too many nozzles here. It will definitely affect your bottom line in a DTW scenario of too much runoff. If you can get adequate coverage with less misters it is much more ideal and will probably be less prone to oversoaking your roots too. Are you going to try using an accumulator or not? Reasons?The root chambers will be 4X8X1 or 32 cubic foot. The base design will use two Shurflo 100 PSI pumps per rack pushing 45 Teffen nozzles. I am going to experiment with a number of other nozzle types and pressures so the setup may change somewhat.
The lid design is modular ie: you can switch out hole size, placement and number, or go to a 4X8 grow mat for micro greens. The inner manifold will also be modular and can be swapped. So if you don't like the Teffen nozzles, no sweat.. just swap the nozzles, or change the manifold.
If you are growing micro greens, you can do a three tray stack. I'm going to be growing Basil for our demonstration.
My goal is a MSRP under $6K (commercial system, heavy duty built), but the system is designed to be used with a separate nutrient system as there are no reservoirs, the system will be drain to waste.
For an idea of ROI, this system should be able to grow 32-40 lbs of micro basil per month.. micro basil is fetching about $32 per lbs.
A different pic..
View attachment 2261481
From a commercial standpoint it made the most sense. That's not to say I haven't ruled out other options or that I'm not going to try them. I have to start somewhere and this route made the most sense to start with.Looks very nice, what made you decide to go HP hydraulic vs. the other alternatives?
I've considered that and the way I am designing the manifold inside the root chamber I can do quick changes to the number of nozzles, runners etc.. It will make more sense the further along I get. When finished, this one system will be very modular, meaning it can be easily tailored to every growers needs. It will also make R&D easier.Be open to the idea you may be thinking of using too many nozzles here.
Are you serious? For under $100 you can get one more suited to the task at hand that is a 10 gallon tank or more as it will only hold less than 1/3 of that in nutes with all the compressed air providing the pressures you'll need to supply all your proposed nozzles with instant pressure...
Nice tanning bed. Where's the mattress?