The UK Growers Thread!

[W Dragon]

I've ripped a few ceilings down and hacked off walls in my time yes mate your right the shit gets everywhere even look like you got eye liner on lol i think they have been done and are now plaster board but i'll properly check it over when i get the keys i've been in there to view it but forgot most of it now lol

Fingers crossed for ya mate eitherway though your obviously not stupid and know what your doing (could have done with you at my last house lol) lol eye liner not the best look when your on your way home from work looks like you've been working down a mine somewhere, I fucking hate the stuff even when it's not in your house you still seem to find marks from it on ya walls etc I've only worked with it a few times and it would take a lot of money to get me to do it again, don't know why I've worked with some nasty chemicals etc but hate that dust, I used to have to strip off outside the house when I was working with it wouldn't have been too bad but at christmas with snow and ice everywhere you just look like a nutter stripping down to ya boxers and even then I'd find it all around the nuts region lol

 

[dura72]

fuck that never heard of just scrapping it off sounds long

you would not believe it mate!! soaked the wall with warm soapy water then hit it with a steamer, takes fuckin days !! imagine if you will trying tae take woodchip off after its been superglued on. its like that...but worse.

 

[00ashoo]

take less time too rip it all down with a claw hammer n board it back up, less bloody stress too
bet you had a right vocabulary going off

 

[3eyes]

I've worked with a few female architects and so far no complaints, one in particular was shit hot at her job!!!! knew every detail inside and out and left nothing to question there's so many out there that will leave alot of details down to the builders it's unreal, If I wasn't so dull I could probably do it lol
lol the 70's that's a new build in some parts down here mate, I imagine 3eyes has seen some real old ones, we got a few that time forgot, I don't think I've ever lived in a house younger than 70yrs, the house I grew up in didn't have any running water, gas or electrics when my parents bought it, coal fires and a tin bath also they had an outside toilet lmao the man who lived there before them died in his 90's and it was his family home so fuck know's how old it is now.

I've lived in houses ranging from 140 years old to brand new the 1 i'm buying is about 105 i remember pissing in a bucket on the landing when i was a kid as we didn't have an in door bog and having to have baths in the sink the big square fuckers AKA a bosch around here. we're a bit more civilised these days not much but a bit lol

 

[cannabutt]

Wot ya fuckin waitin for ??? Lmao

fuck me. can anyone see the one pic? Lmao

 

[IC3M4L3]

coat of pva n skim straight over it

yeh but itell need a 5ml skim wich is a lot and as i cant plaster or hav ever tried lol not happnin UNLESS someone fancies a day out as many cup of teas and takeway meals as you want?


also its the PROPPPER artex i.e ade with plaster or watever fuking big arse swirls everyware our hall is 17 ft long and then its all upstairs and top landing so only place it aint is the bathroom,bedrooms,kitchen/dinig room and lounge
ts a huge fuking job mate the halls that tall up the stais i cant even reach and im ft 7


so any volunteers/.?

 

[00ashoo]

just slap some up man n smooth it over, the only way your gone get rid is if you just tell yaself it aint really there

 

[mrt1980]

yeh but itell need a 5ml skim wich is a lot and as i cant plaster or hav ever tried lol not happnin UNLESS someone fancies a day out as many cup of teas and takeway meals as you want?


also its the PROPPPER artex i.e ade with plaster or watever fuking big arse swirls everyware our hall is 17 ft long and then its all upstairs and top landing so only place it aint is the bathroom,bedrooms,kitchen/dinig room and lounge
ts a huge fuking job mate the halls that tall up the stais i cant even reach and im ft 7


so any volunteers/.?

ive done a bit of scraping off artex with a mate. never again!!! it took fucking ages to do a small wall with a steamer and scrapper lmao

we did speed up a bit when we used the steamer to warm up the paint for a few seconds and peel it off, then hold it on the artex. it softened it up a bit better then

 

[cannabutt]

10 - 2 = 8

 

[IC3M4L3]

ive done a bit of scraping off artex with a mate. never again!!! it took fucking ages to do a small wall with a steamer and scrapper lmao

we did speed up a bit when we used the steamer to warm up the paint for a few seconds and peel it off, then hold it on the artex. it softened it up a bit better then

ours is the stuff done with plaster NOT the stuff what peals off,,,seems almost like they got ther plaster trowle and made cirlces with it

 

[mrt1980]

ours is the stuff done with plaster NOT the stuff what peals off,,,seems almost like they got ther plaster trowle and made cirlces with it

no mate it wasnt the artex that peeled off it was the paint. we got the paint off first because it was stopping the steam sinking into the artex

 

[IC3M4L3]

no mate it wasnt the artex that peeled off it was the paint. we got the paint off first because it was stopping the steam sinking into the artex

i was thinking of a easier option,,,get sum of that real thin ply wood u get it in like big fucking sheets from b and q or werever and get a heavy duty scraper and scrape the walls then fastenthelarge sheets of wood to the wall ther like 7 ft x 5 ft or sum shit,,then down the joins wer they join just run sum plastic wood down with inger then sand it down and wallpaper,,,, if i plasterboard it over it will need a skim and il loose me skirting but this way il only loose a 2-3 ml of the scirting bord as the woods only 2ml thick

u get my meaning dont u?

 

[cheddar1985]

Rar rar fuckin raaaarr

 

[newuserlol]

Clones pyschosis and exo cheese coming up not cheap but wit a sample of bud in cluded so u no what ur grow botcions only payment pm me,

 

[IC3M4L3]

Clones pyschosis and exo cheese coming up not cheap but wit a sample of bud in cluded so u no what ur grow botcions only payment pm me,

wat?? u put the price up to £2.50?? u stingy fucker

BAKLWALA U LIBERAL HAPPY PM'D YOU


sambo to sell these gabbies how would u explain wat they are to sell??

be changing to pre-gabs soon hopefully but all the same explain to chedz wat they is

 

[newuserlol]

What u pay for clones is less than half what others do cause u got something I won't! Fact.

As for weed best weed ya smoked will be available in 2wks bitcoins payment to any I don't really no.

 

[IC3M4L3]

What u pay for clones is less than half what others do cause u got something I won't! Fact.

As for weed best weed ya smoked will be available in 2wks bitcoins payment to any I don't really no.

lol chill winston only breaking ur balls,,,,, u have been a mardy fucker recently.....

anyways explain to cheds wat gabbies are coz he got a rake the other week and aint got a clue wtf they do n shit lmfao haha

 

[newuserlol]

Bro I told ya what they worth to me and the others u wana sell-swap with some1 else no bother to me I can source em many places.

 

[newuserlol]

Gabbies or garbutiuin I fink they called are a strong back pain-never endin painkiller especially the 300mgs

 

[IC3M4L3]

Bro I told ya what they worth to me and the others u wana sell-swap with some1 else no bother to me I can source em many places.

WAT ARE YOU TALKING ABOUT?? lol you on one again or wat?

Gabbies or garbutiuin I fink they called are a strong back pain-never endin painkiller especially the 300mgs

yeh its the 300's i get well il see doc early in the week to get chnged to pre-gab,,,dunno why like wen ther not as string maybe summet in them makes em better??

im not a drug abuser LIKE SUM! so to me if i aint got pam on the end i aint got a fucking clue