• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Lacy's Harvest and Attempt to Make Hash for 1st Time

Lacy

Lacy

New Member
Perfect. I was just gonna ask this. I am now using the blender method and I do have some thicker pieces so this is ok.
I went out today with hubby and got a blender manual chopper shifter alcohol etc and have chopped some stuff up now. I am going to make some of the blender hash today and wait for my bubble thingy.:mrgreen:

Here is a pic of what it looks like when I out it through the blender. i hope this is fine enough. Thanks klunk. I'd check your jounral but I have hubby practically glued to my side for some reason today. He is like my shadow right now:? I'll check later on tonight;)

Thanks again. Your comments make a lot of sense to me. :mrgreen:

KlunkeredAt4:20 said:
If your using the blender method or the Alcohol Method then stems are ok as long as the thickest bits are cut up, however when you get your bubbleator b-quick you'll have to discard the thickest and toughest ones as they could tear the zip bag you put them in. Fixed the pictures on my journal, thanks for taking a looky. Have fun hash makin!

Klunk
Click to expand...
 

Attachments

Lacy

Lacy

New Member
Hi Jimmy. i agree 100%. that is my main goal. period.

Hubby just saw your post and instantly said you were from out east because of your avatar pic.

True?

Lacy:blsmoke:
jimmyspaz said:
I like having scales just so I can answer these questions..But I agree, I'm not aiming at max. weight but quality.. That's why I grow ,so I.ve always got the best weed around...:joint::joint:
Click to expand...
 
DrWatson

DrWatson

Well-Known Member
usually when i have a panic attack i just get some xanax...it helpsjust for future reference so maybe next time you could get some instead of pulling your threads...nice looking buds by the way...
 
Lacy

Lacy

New Member
LMAO!!!!!!!!!!!!!!!!!!! Very good.

Oh good lord I laughed so hard when I read this!!!!!:lol::clap::clap:

Unfortunately I can't take those but 'yes' it sure might have been better than the alternative. Kind of used to it....but never am...if you know what I mean.

Thanks
lacy:blsmoke:
DrWatson said:
usually when i have a panic attack i just get some xanax...it helpsjust for future reference so maybe next time you could get some instead of pulling your threads...nice looking buds by the way...
Click to expand...
 
Lacy

Lacy

New Member
yes a coffee grinder would work well.

Good idea.:hump:

Thanks.

Right now I have a bunch of stuff all blended up. i am gonna chuck some of my stems because they are real thick and not breaking up too easily.

I have to run out to the store and get some more alcohol and tonight I am mkaing some bender hash and some alcohol stove top (stuffing) hash:roll:

There is so much contradictory info out there that I just have to experiment to know the truth. :mrgreen: I just hope I don't ruin a lot of good weed cause I am outting some. good stuff in there also.
hemlockstones said:
looks like what i use when i make it!? stems and all, cept i use a coffee grinder.. smells great doesnt it!?
Click to expand...
 
Juntistik

Juntistik

Well-Known Member
Lacy said:
I just hope I don't ruin a lot of good weed cause I am outting some. good stuff in there also.
Click to expand...
i dont think you will end up with anything ruined..unless you call a variety of hash with different potencies and textures ruined :)
 
Lacy

Lacy

New Member
Heehee. Oh thank you. What a perfect answer!!!!!!
:hug: gotta give a hug for that reply. Um....varieties of yummy hash.:roll:
Gosh what a novel idea. :shock:
A different type of hash for each mood.:roll: Gosh I am gonna need a lot of different types sooooo better go back to work then.:?:twisted:

Thnaks buddy:mrgreen:

pics coming up soon I hope:|
Juntistik said:
i dont think you will end up with anything ruined..unless you call a variety of hash with different potencies and textures ruined :)
Click to expand...
 
Lacy

Lacy

New Member
Gosh I get so side tracked here at times I completely forget my question.

Ok most of the blender hash methods I have read about mention about using a presser. Could someone please elaborate a it on this for me?
I'm not sure if they mean a certain device or just use say cheese cloth and clamps?

I'm about to start and need to know that before I do.

Please:roll:
 
KlunkeredAt4:20

KlunkeredAt4:20

Active Member
Most big manufacturers use presses a bit like printng ones as a way of compacting the powdered hash into blocks etc. Easier for smaller loads is simply get some like doctors gloves and just press it in your hands for a while until it hardens and then form a shape. When using the blender method what you'll get out will be a wetish mass of trichromes which is usually easy to then mold with your hands.

Klunk
 
Lacy

Lacy

New Member
Oh perfect klunk.
Thank you so very much.
Oh I am soooo excited about doing this.
Another waa hoooooooooooo.:mrgreen:

BTW Klunk. Your plants love marvelous dear!!!!!!!!:hump:
KlunkeredAt4:20 said:
Most big manufacturers use presses a bit like printng ones as a way of compacting the powdered hash into blocks etc. Easier for smaller loads is simply get some like doctors gloves and just press it in your hands for a while until it hardens and then form a shape. When using the blender method what you'll get out will be a wetish mass of trichromes which is usually easy to then mold with your hands.

Klunk
Click to expand...
 
Lacy

Lacy

New Member
Hey hippieman
I was just kidding wif ya. Its not my first grow but yes it is very nice weed.


So I am now making this hash using the blender and ice method until I have more advanced equipment knowledge and experience.

For now I am keeping it simple 'cause I can manage to **** anything up.:roll:

So it says to grind up the weed and leaves etc. I did not add too many stems as it just turns out to become ropey hemp -like stuff at the top anyway.

Then I grabbed a handful of this pwered stuff threw it in da blender with ice and water 50/50 and blended for about 2 to 3 minutes.

Then I poured them into containers and put them in da fridge.


BUT :?


It sure looks weird. :roll: It looks like green pea soupl or something.:spew:I hope I am doing this right:cry:

Here are some pics. Don't laugh:twisted:
 

Attachments

Lacy

Lacy

New Member
So this recipe or method (whatever) that I am following requires coffee filters and a tube .

I don't know wether they mean the paper coffee filters OR can I just use my gold coffee filter?????:?

Also a tube. Not very specific.
Turkey baster or fishing hose???? :roll:

Right now those are my only choices.

I am going to leave the containers in the fridge overnight and see how they settle. This is a lot of fun.
Thanks
Lacy:blsmoke:
 
kuntjoose

kuntjoose

Well-Known Member
this is the blender method the way i understand it.

fill bender half full of ice. add material. fill the rest with ice then add water to cover. blend throughly. let it sit till all the green plant material floats to the top with the ice. this allows all of the trichomes to sink to the bottom of the blender. then skim off all the green stuff. take the remaining water and pour through a coffe filter to seperate the water from the trichomes.

worked for me. GL:mrgreen:
 
You must log in or register to reply here.
Top