Matt Rize
Hashmaster
or blast onto a shower door, more surface area speeds up the evap.Ok interesting... So just blast it in the pyrex and let it sit.... How do you determine its dry enough and ready to be scraped?
or blast onto a shower door, more surface area speeds up the evap.Ok interesting... So just blast it in the pyrex and let it sit.... How do you determine its dry enough and ready to be scraped?
when it's not gooey anymore, it's dry.Ok interesting... So just blast it in the pyrex and let it sit.... How do you determine its dry enough and ready to be scraped?
Ok cool, gonna give it a try with a batch. Since I will prob only run like a oz of trim, it wont be as thick as yours in the pics so i figure mine wont take as long to dry. Fun stuff.when it's not gooey anymore, it's dry.
when the bubbles shatter and it flakes when scraped.
as matt stated, the thinner you can spread it the better. only spread it while it's still in liquid form. once it turns "oily" and starts bubbling stop moving it. i rock my dish back and forth for a minute or two while the butane evaporates. once most of the liquid is gone i simply put it on a shelf.Ok cool, gonna give it a try with a batch. Since I will prob only run like a oz of trim, it wont be as thick as yours in the pics so i figure mine wont take as long to dry. Fun stuff.
He is a jerk and swing pads are for girls! Oversized nails all day.
Ti, Quartz, and Glass
QUOTE]
A jerk to you maybe? curves are for girls? i have all those nails u posted and more,nothing about those are "over sized" lol... u must not have the lung to pull the vapor into a curve....whos the girl?
ight now im confused!, i seen u have a vac, and i seen ur dish full of sappy errls before!...how the hell do u get flakey errls back into sap with no heat? and does ur errl even react in the vac?when it's not gooey anymore, it's dry.
when the bubbles shatter and it flakes when scraped.
it's been in the 90's here lately. it relaxes at room temp in my playhouse.ight now im confused!, i seen u have a vac, and i seen ur dish full of sappy errls before!...how the hell do u get flakey errls back into sap with no heat? and does ur errl even react in the vac?
he's actually a jerk to a lot of people, and his sister blew his rigs for years. so they kinda are for girls.He is a jerk and swing pads are for girls! Oversized nails all day.
Ti, Quartz, and Glass
QUOTE]
A jerk to you maybe? curves are for girls? i have all those nails u posted and more,nothing about those are "over sized" lol... u must not have the lung to pull the vapor into a curve....whos the girl?
So ur doing a natural heat purge?.it's been in the 90's here lately. it relaxes at room temp in my playhouse.
i have used a small hot plate when vac'ing just to see if it would bubble. i typically don't even bother with either though. i bought the vac for glass blowing. it's more for shits and giggles then anything.
nah dude ur thinking of g girl rigs! theres g girls and theres hmk's lol..tell u the truth i rather have a g girl rig! u guys are on some sexist shit lolol! so ur saying only girls should buy glass from girl glass blowers?... that ridic cause sakibomb is a chick and shes an amzing artist! opinions are like ASSHOLES, everyones got one!he's actually a jerk to a lot of people, and his sister blew his rigs for years. so they kinda are for girls.
i DON'T purge.So ur doing a natural heat purge?.
nah dude ur thinking of g girl rigs! theres g girls and theres hmk's lol..tell u the truth i rather have a g girl rig! u guys are on some sexist shit lolol! so ur saying only girls should buy glass from girl glass blowers?... that ridic cause sakibomb is a chick and shes an amzing artist! opinions are like ASSHOLES, everyones got one!
Titanium huh. I've always wondered about Tungsten Carbide.Quartz is to glass as steel is to butter. Glass melts like butter, quartz melts like steel. In fact, it melts at 3000(f) versus borosilicates 1500(f). Because of this, quartz nails last a lot longer than borosilicate glass nails, and anyone with a glassblowing torch can work quartz. Most glassblowers dont have cnc and lathes for cutting titanium, and wouldnt want to either. Quartz is used over borosilicate because it wont break as often as borosilicate or stress as much. Titanium is used over quartz because it lasts forever -- it's the last nail you ever buy.
Tungsten picks melt in about 10 seconds in the torches flame, and they also have a substantial amount of gasses that burn off of it which scars glass every time........ Given that, I'd never try tungsten and oil together............Titanium huh. I've always wondered about Tungsten Carbide.
Tungsten Carbide is dozens of times stronger than Titanium and will break far less than Titanium. I don't know the melting point of TC offhand, but that was my only point.Tungsten picks melt in about 10 seconds in the torches flame, and they also have a substantial amount of gasses that burn off of it which scars glass every time........ Given that, I'd never try tungsten and oil together............